| Model: | STC-BC83A |
| Resolution: | XGA (0.8 MegaPixel) |
| Image Sensor: | 1/3" Interline CCD (ICX204AK) |
| Signal Format: | Color Progressive |
| Frame Rate: | 30 fps |
| Effective Picture Element: | 1034 (H) x 779 (V) |
| Active Picture Element: | 1024 (H) x 768 (V) |
| Chip Size (mm): | 5.8 (H) x 4.92 (V) mm |
| Cell Size (um): | 4.65 (H) x 4.65 (V) µm |
| Vertical Frequency: | 29.59 Hz |
| Horizontal Frequency: | 23.23 kHz |
| Horizontal Drive Frequency: | 29.5 MHz |
| Scanning Method: | Full Scanning, Partial Full Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning |
| Sync System: | Internal / External |
| Communication: | RS232 via DF12-36DS-0.5V connector |
| Trigger Shutter: | Edge Preset Trigger (V-reset, Non-reset), Pulse Width Trigger (V-reset, Non-reset) |
| Shutter Speed: | OFF, 1/5 to 1/96,000 seconds (Variable at every H and clock) |
| Minimum Illumination: | 0.14 Lux at F1.2 |
| Gain: | 0 to 27 dB |
| S/N Ratio: | @ 8bit output: ≤ 3 Digit (Gain 0 dB); @ 10bit output: ≤ 10 Digit (Gain 0 dB) |
| Gamma: | 1.0 |
| Lens Mount: | C Mount |
| Video Output: | Digital 8 or 10 bit parallel low voltage output |
| Tap: | 1 Tap |
| Interface Connector: | DF12-36DS-0.5V (Hirose) |
| Optical Filter: | No IR Cut Filter |
| Optical Center Accuracy: | Positional Accuracy in H and V Directions: +/- 0.31 mm Rotational Accuracy of H and V: +/- 2.1 deg. |
| Power: | DC12V ± 10% |
| Power Consumption: | < 1.8W, 150mA |
| Operating Temperature: | It depends on 1) how the system is assembled and 2) how heat conditions are managed w/in the system. |
| Storage Temperature: | -30 ~ 65⁰C (-38.1⁰F ~ 149⁰F) |
| Dimensions: | 28 (W) x 28 (H) x 33 (D) mm (1.1" x 1.1" x 1.29") |
| Weight: | 26g (0.91 oz) |