| Model: | STC-GEC33A |
| Resolution: | VGA (0.3 MegaPixel) |
| Image Sensor: | 1/3" Interline CCD (ICX424AQ) |
| Signal Format: | Color Progressive |
| Frame Rate: | 90 fps |
| Active Picture Element: | 648 (H) x 494 (V) |
| Cell Size (um): | 7.4 (H) x 7.4 (V) |
| Vertical Frequency: | 94.784 Hz |
| Horizontal Frequency: | 47.2028 kHz |
| Horizontal Drive Frequency: | 36.8181 MHz |
| Scanning Method: | Full, 1/2 Partial, 1/4 Partial, Variable Partial Scanning and Binning |
| Sync System: | Internal / External |
| Gigabit Ethernet: | |
| - Video Format | 8/10/12bit Raw Data |
| - Hardware Interface | IEEE802.3 (1000BASE-T) |
| - Protocol | GeniCam and GigE Vision Compatibility |
| - Cable | CAT-5e / CAT-6 LAN Cable |
| ALC: | Electronic iris and AGC on and off independently w/ user programmable target value |
| Communication: | RS232 via Ethernet (TBD) |
| Trigger Shutter: | Pulse Width Trigger / Edge Preset Trigger |
| Shutter Speed: | Preset: OFF, 4,095H (H: one horizontal interval) to 306 clocks, Pulse Width: No limitation |
| Minimum Illumination: | 1 Lux at F1.4 |
| Gain: | 0 to 27 Db |
| S/N Ratio: | ≤ 10 Digit (Gain 0dB) |
| Gamma: | User definable gamma table (12bits to 12bits, Factory Default: 1.0) |
| Lens Mount: | C Mount |
| Interface Connector: | MOD-YSJ88YA03C + (HONDA), HR10A-10R-12PB (HIROSE) |
| Optical Filter: | IR Cut Filter |
| Optical Center Accuracy: | Positional Accuracy in H and V directions: +/- 0.31mm Rotational Accuracy of H and V: +/- 2.1 deg. |
| Shock: | 70G (3 directions, 3 times each) |
| Vibration: | 10G (20 to 200Hz) |
| Power: | DC12V +/- 10% (DC24V input model optional) |
| Power Consumption: | TBD |
| Operating Temperature: | -5°C ~ 45°C (23°F ~ 113°F) |
| Storage Temperature: | -30°C ~ 65 °C (-22°F ~ 140°F) |
| Dimensions: | 35 (W) x 35 (H) x 50.6 (D) (1.37" x 1.37" x 1.99") |
| Weight: | TBD |