| Model | STC-TC202USB-B |
| Image Sensor | 1/1.8” Interline CCD (ICX274AQ) |
| Signal Format | Color Progressive |
| Operating Systems | Windows 2000, XP, Vista (32 bit) & Linux |
| Drivers | Viewing Software (Simple & Advanced Menus), DirectX, Twain, Linux, NI LabVIEW™ |
| Software Development Kit | Standard SDK & Trigger SDK (for Software and Hardware Triggers) - Full Documentation |
| Maximum Frame Rate | |
| - Full Scan | 15 fps |
| - 1/2 Partial Scan | 30 fps |
| - 1/4 Partial Scan | 60 fps |
| Total Picture Element | 1688 (H) x 1248 (V) |
| Effective Picture Element | 1628 (H) x 1236 (V) |
| Active Picture Element | |
| - Full | 1600 (H) x 1200 (V) |
| - 1/2 Partial | 1600 (H) x 544 (V) |
| - 1/4 Partial | 1600 (H) x 208 (V) |
| Chip Size (mm) | 8.50 (H) x 6.80 (V) |
| Cell Size (um) | 4.40 (H) x 4.40 (V) |
| Pixel Clock Frequency | 36.818 MHz |
| Trigger Method | Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop) |
| Scanning Method | Full Progressive, Partial Scanning (1/1, 1/2, 1/4), Variable |
| Sync System | Internal Sync |
| Scanning System | Progressive |
| Shutter Speed | Auto / Manual (Set via Software) |
| Minimum Illumination | 0.73 Lux @ F1.2, 20 IRE; 1.39 Lux @ F1.2, 50 IRE |
| Ext. Low Light Capability | Extended Low Light Capability via Software Trigger |
| Gain | Auto / Manual (Set via Software) |
| Gamma | Manual (Set via Software) |
| Lens Mount | C Mount |
| White Balance | Auto / Manual / One-shot (Set via Software) |
| Video Output | USB 2.0 High Speed |
| Shock | 70G (3 Directions, 3 Times Each) |
| Vibration | 10G (20 to 200Hz) |
| Power | 2.80W, < 560mA |
| Input Voltage | +5Vdc via USB port |
| Operating Temperature | 0°C ~ 40°C (32F° ~ 104°F) |
| Storage Temperature | -30°C ~ 65°C (-22°F ~ 149°F) |
| Dimensions | 45 (W) x 45 (H) x Var. (D) mm (1.77" x 1.77" x Var.) |
| Weight | Approximately 45g (1.58 oz) |