| Model | STC-CL202A |
| Resolution | UXGA (2 MegaPixel) |
| Image Sensor | 1/1.8" Interline CCD (ICX274AL) |
| Signal Format | Monochrome Progressive |
| Frame Rate | 15 fps |
| Total Picture Element | 1688 (H) x 1248 (V) |
| Active Picture Element | 1620 (H) x 1220 (V) |
| Chip Size (mm) | 8.50 (H) x 6.80 (V) |
| Cell Size (um) | 4.4 (H) x 4.4 (V) |
| Vertical Frequency | 15.3164 Hz |
| Horizontal Frequency | 19.176 kHz |
| Horizontal Drive Frequency | 36.8181 MHz |
| Scanning Method | Full Scan / Partial Scan (1/2, 1/4, Variable), Binning |
| Sync System | Internal / External (HD/VD) |
| Communication | RS232 via CameraLink® connector |
| Trigger Shutter | Pulse Width Trigger (V Reset, Non Reset), Edge Preset Trigger (V Reset, Non Reset) |
| Shutter Speed | OFF, 1/2 ~ 1/100,000 (Variable, can be set at every H and clock) |
| Minimum Illumination | 0.04 Lux @ F1.2, 20 IRE; 0.06 Lux @ F1.2, 50 IRE |
| Gain | Adjustable Fixed Gain (0 ~ 27dB) |
| S/N Ratio | @ 8bit output: <= 3 Digit (Gain 0 dB); @ 10bit output: <= 10 Digit (Gain 0 dB) |
| Gamma | 1.0 |
| Lens Mount | C Mount |
| Video Output | Digital 8 or10 bit CameraLink® (Base Configuration) |
| Optical Filter | No IR cut filter |
| Optical Center Accuracy | Position accuracy of H and V direction: +/- 0.31mm |
| Shock | 70G (3 directions, 3 times each) |
| Vibration | 10G (20 to 200Hz) |
| Power | 12V DC +/- 10% |
| - Consumption | < 3.0W, 250mA |
| Operating Temperature | -5°C ~ 45°C (23°F ~ 113°F) |
| Storage Temperature | -30°C ~ 65 °C (-22°F ~ 140°F) |
| Dimensions | 28(W) x 28(H) x 29.5(D) mm (1.1” x 1.1” x 1.16”) (Not including lens mount or the connector) |
| Weight | 43g (1.51 oz.) |