 |
|
| |
|
The
STC-CLC232A is a full featured, cost
effective UXGA progressive scan digital
Camera Link cube camera with 1/1.8"
CCD with RGB Primary Color Filter.
Featuring a full frame 30fps UXGA output,
partial scanning, triggering, and reset
capabilities. |
|
Specifications |
| |
| Product |
|
| Imager: |
1/1.8 interline UXGA color (Bayer)
progressive CCD: ICX274AQ |
1/1.8 interline UXGA monochrome
progressive CCD: ICX274AL |
|
| Effective Picture Element: |
1628 (H) x 1236 (V) |
|
Active Picture Element: |
UXGA: 1620 (H) x 1220 (V) |
|
Chip Size: |
8.50 (H) x 6.80 (V) mm |
|
Cell Size: |
4.4 (H) x 4.4 (V) µm |
|
Scanning System: |
Progressive Scanning |
|
Scanning Method: |
Full, 1/2 partial, 1,4
partial, Normal / Binning |
|
Vertical Frequency (frame rate): |
30.63 Hz |
|
Horizontal Frequency: |
38.352 kHz |
|
Horizontal Drive
Frequency: |
73.636 MHz |
|
Resolution: |
1220 TV lines (Color / Raw data) |
| Frame
Rate: |
30 fps |
| S/N
Ratio: |
<= 15 Digit (Gain 0dB) |
| Minimum
Scene Illumination: |
7 Lux @ F1.2 (With
Normal Mode) |
| Sync
System: |
Internal |
| Video
Output: |
10bit Camera Link |
| Shutter
Speed: |
OFF, 1/2 ~ 1/100,000 Variable,
(Can be set at H and Clock) |
| Gain: |
Adjustable Fixed Gain (0 ~ 29.4dB) |
| Gamma: |
1.0 |
|
Lens
Mount: |
C mount |
|
Communication: |
RS232 via Camera Link
connector |
|
Power Supply: |
Input Voltage: 12V DC +/-
10% |
| |
Consumption: Less than 1.8W |
| Trigger
Mode: |
Pulse with trigger
(v-Reset, Non-Reset) |
| Edge preset trigger
(v-Reset, Non-Reset) |
|
Dimensions: |
28(W) x 28(H) x 53.5(D) mm
*Mount to end of the connector |
| Weight: |
Approximately 75.5g (2.66
oz.) |
| Ambient
Condition: |
| Operating Temperature: -5° C ~
45° C |
| RoHS: |
RoHS Compliant |
