Home· Company Directory· Company Profile· Customer Support· Employment
 
Camera Link© Cube Camera
STC-CL202A
STC-CLC152A
Application Manual
Product Specification
Request a Demo
Printer Friendly Page
 
The STC-CLC152A is a full featured, cost effective SXGA progressive scan digital Camera Link® cube camera with 1/2" CCD with Color. Featuring a full frame 19fps SXGA output, partial scanning, triggering, and reset capabilities.
Specifications
 
Product
STC-CLC152A STC-CL152A
E
l
e
c
t
r
o
n
i
c
a
l
Imager:
1/2 interline UXGA
color
progressive CCD: ICX205AK
1/2 interline UXGA
monochrome
progressive CCD: ICX205AL
Total Element: 1434 (H) x 1050 (V)
Effective Picture Element: 1392 (H) x 1040 (V)
Active Picture Element: SXGA: 1360 (H) x 1024 (V)
Chip Size: 7.6 (H) x 6.2 (V) mm
Cell Size: 4.65 (H) x 4.65 (V) µm
Scanning System: Progressive
Scanning Method: Full scanning, Partial full scanning,
1/2 partial scanning, 1/4 partial scanning,
Variable partial scanning, Binning (B/W Only)
Vertical Freq (frame rate): 15.28 (15fps) / 19.3 (19fps) Hz
Horizontal Frequency: 15.998 (15fps) / 20.57 (19fps) kHz
Pixel Frequency: 28.6363 (15fps) / 36.8181 (19fps) MHz
Resolution: 1024 TV lines (Raw data)
S/N Ratio: <= 10 Digit (Gain 0dB)
Minimum Scene Illumination:
1 Lux at F1.4 2 Lux at F1.4
Sync System: Internal/External
Video Output: Digital 8 or 10 bit Camera Link (Base configuration)
Shutter Speed: OFF, 1/2 to 1/100,000 sec.
(Variable at every H and clock)
Gain: 0 to 27dB
Gamma: 1.0
White Balance: Auto / Manual / One shot (software selectable)
Communication: RS232 via Camera Link connector
Power Supply: Input Voltage: 12V DC +/- 10%
  Consumption: Less than 2.5W
Trigger Mode: Edge preset trigger (V-reset, Non-reset)
Pulse width trigger (V-reset, Non-reset)
m
e
c
h
a
n
i
c
a
Optical Filter: No IR cut filter 
Dimensions: 28(W) x 28(H) x 46.3(D) mm
*Mount to end of the connector 
Optical Center Accuracy: Positional accuracy in H & V directions: +/- 0.31mm
Rotational accuracy of H and V:+/- 2.1 deg.
Lens Mount: C mount
Interface Connector: HR10A-7R-6PB (Hirose) equivalent 
Weight:  Approximately 52g (Camera: 43g, tripod: 9g) 
e
n
v
i
r
o
n
m
e
n
t
a
Ambient Condition:   Performance Temperature: 0°
C ~ +40° C, RH:0 to 85% (No condensation)
Operating Temperature: 
-5° C ~ 50° C, RH:0 to 85% (No condensation)
Storage Temperature: -30° C ~ 60° C, RH:0 to 85% (No condensation)
Vibration:  20Hz to 200Hz to 20Hz (5min./cycle), acceleration10G 3 direction 30 min. each 
Shock: Acceleration70G, half amplitude 6ms
3 direction 3times each 
MTBF:  70,000h 
Adaptation Standard:  EMS: EN61000-6-2, EMI: EN55011 (Class B) 
RoHS:  RoHS Compliant 
 
 
Copyright ® 2004-2007 Sensor Technologies America, Inc.
Home | Company | Company Profile | Contact | Sales | Engineering
Customer Support | Directory | Site Map  | Job Openings