|
|
 |
|
| |
| The STC-A33A
is a 1/3" monochrome progressive scan cube
camera with 648 x 494 resolution. This
series features a VGA sensor with a scan
rate of 30, 60 and 90fps,
analog output and variable integration
shutter trigger. |
|
Also See:
STC-A33A |
STC-A83A |
STC-A152A |
STC-A202A |
|
Specifications |
| |
| Product |
STC-A33A |
E
l
e
c
t
r
o
n
i
c
a
l |
Imager: |
1/3" interline VGA monochrome
progressive CCD: ICX424AL |
|
Total Element: |
692 (H) x 504 (V) |
| Effective Picture Element: |
659 (H) x 494 (V) |
|
Active Picture Element: |
VGA: 648 (H) x 494 (V) |
|
Chip Size (mm): |
5.79 (H) x 4.89 (V) |
|
Cell Size (µm): |
7.4 (H) x 7.4 (V) |
|
Scanning System: |
Progressive |
|
Scanning Method: |
Full scanning, Partial full scanning,
1/2 partial scanning, 1/4 partial scanning,
Variable partial scanning,
Binning, Binning partial scanning,
Binning 1/2 partial scanning,
Binning 1/4
partial scanning,
Binning variable partial scanning |
Vertical Frequency
(frame rate): |
31.47 (30fps) / 62.94
(60fps) / 94.784 (90fps) Hz |
|
Horizontal Frequency: |
15.7343 (30fps)
/ 31.4685
(60fps) / 47.2028 (90fps) kHz |
| Pixel
Frequency: |
12.2727 (30fps) /
24.5454 (60fps) / 36.8181 (90fps) MHz |
|
Resolution: |
TBD |
| S/N
Ratio: |
56 dB (GAIN 0 dB) |
| Minimum
Scene Illumination: |
1 Lux at F1.4 |
| Sync
System: |
Internal / External |
| Video
Output: |
1.0 Vp-p / 75Ω、DC
coupling (0V) |
| Shutter
Speed: |
Dip Switch:
OFF, 1/200, 1/500, 1/1,000, 1/2,000,
1/4,000, 1/8,000, 1/20,000 second
Communication:
OFF, 1/2 to 1/100,000 sec.
(Variable at every H and clock) |
| Gain: |
0 to 27 dB |
| Gamma: |
1.0 |
|
Communication: |
RS232 via 12pin
connector |
|
Power Supply: |
Input Voltage: DC12V ±
10% |
| |
Consumption: Less than
1.8 W |
| Trigger
Mode: |
Edge preset trigger (V-reset, Non-reset)
Pulse width trigger (V-reset, Non-reset) |
m
e
c
h
a
n
i
c
a
l |
Optical
Filter: |
No IR cut filter |
| Optical
Center Accuracy: |
Position accuracy in H
and V directions: +/- 0.31mm
Rotation accuracy of H and V:+/- 2.1 deg. |
| Dimensions: |
28(W) x 28(H) x 46.3(D) mm
*Mount to end of the connector |
| Lens
Mount: |
C mount |
|
Interface Connector: |
HR10A-10R-12PB (Hirose)
or equivalent |
|
Tripod: |
Tripod can be attached
to 4 plates
(4 screws on the bottom plate,
3 screws on
the other 3 plates) |
| Weight: |
Approximately 52g
(Camera: 43g, tripod: 9g) |
e
n
v
i
r
o
n
m
e
n
t
a
l |
Temperature & Humidity: |
Operational Temperature:
-5 to 50 deg.C, RH: 0 to 85% (No
condensation) |
Storage Temperature:
-30 to 65 deg.C, RH: 0 to 90% (No
condensation) |
|
Vibration: |
20Hz to 200Hz to 20Hz
(5min./cycle),
acceleration 10G, 3 directions 30 min. each |
| Shock: |
Acceleration 70G, half
amplitude 6ms,
3 directions 3times each |
|
Standard Compliancy: |
EMS: EN61000-6-2, EMI:
EN55011 (Class B) |
| RoHS: |
RoHS Compliant |
