|
The STC-E43A
and STC-C43A series cameras are industrial
grade 2:1 Interlace cameras, with a 1/3"
monochrome CCD. These cameras are designed
and machined with very tight tolerances to
have optimal CCD centering quality. This
series of cameras is extremely reliable,
provides a high quality image and is very
cost-effective. The size of this camera is
extremely small, the housing has manual dip
switches for on-the-fly adjustments, and the
camera can be controlled via RS232 software. |
|
Specifications |
| |
| Product |
|
| Imager: |
| STC-C42A |
STC-E42A |
1/3" interline monochrome
CCIR CCD: ICX409AL |
1/3" interline monochrome
EIA CCD: ICX409AL |
|
|
Scanning System: |
2:1 Interlace |
| Total
Picture Element: |
795 (H) x 596 (V) |
|
Active Picture Element: |
752 (H) x 582 (V) |
|
Chip Size: |
5.59 (H) x 4.68 (V) |
|
Cell Size: |
6.50 (H) x 6.25 (V) |
|
Horizontal Frequency: |
15.625 kHz |
|
Vertical Frequency: |
50.00 Hz |
|
Pixel Frequency: |
14.1875 MHz |
|
Resolution: |
560 TV Lines |
|
S/N Ratio: |
56 dB (GAIN 0dB) |
| Minimum
Illumination: |
0.75 Lux @ F12 |
| Sync
System: |
Internal / External |
|
Video Output: |
1.0 Vp-p / 75Ω,
DC coupling |
| Shutter
Speed: |
Dip Switch:
F, 1/50, 1/100, 1/120/, 1/250, 1/500,
1/1,000, 1/2,000, 1/4,000, 1/8,000,
1/10,000, 1/20,000, 1/100,000 sec
Communication:
OFF, 1/50 to 1/100,000 sec (Variable at
every H and clock) |
|
Integration: |
Field / Frame |
| Gain: |
0 to 27dB |
| Gamma: |
1 / 0.45 |
|
Communication: |
RS232 via 12pin connector |
| Optical
Filter |
No IR out filter |
| Optical
Center Accuracy |
Rotational accuracy of H
and V: +/- 2.1 deg. |
| Lens
Mount: |
C mount |
| Power
Supply: |
DC 12V DC +/- 10% |
| Power
Consumption: |
Less than 1.8W |
|
Operating Temperature: |
-5° C ~ 50° C, RH:0 to 90%
(No condensation) |
| Storage
Temperature: |
-30° C ~ 65° C, RH:0 to 90% (No condensation) |
| Weight: |
Approximately 52g (Camera: 43g, tripod: 9g) |
|
Dimensions: |
28 (W) x 28 (H) x 46.3 (D)
mm
*including lens mount and the connector |
|
