• Auto Focus Block
  • HD (CMOS) Models
  • HD Models
  • High Resolution
  • Standard Resolution
• Analog
  • Color (NTSC/PAL)
  • Monochrome (EIA/CCIR)
  • OEM Models
  • Remote Micro Head
• CameraLink
  • CMOS Sensor Models
  • Kodak Sensor Models
  • Standard Models
  • Standard (PoCL)
  • Standard (Remote Head)
• GigE
  • Standard Models
  • Standard (PoE)
  • "PowerPlus" (Xilinx)
• High Definition
  • Board Models
  • Cased Models
• Progressive Scan
  • Analog (Board and Cased)
  • Digital (Raw Digital Output)
• Specialty
  • Borescopes
  • Night Probe (Security)
  • Transit Models
• USB 2.0
  • Standard Board
  • Standard Cased
  • Ultra-Small
  • Hard Triggered (AH)
  • Hard Triggered (ASH)
•  
• Closeout Inventory
• Warranties

• Lens Calculator

• Catalog
• Documentation
• Software

• Directory
• Engineering
• Sales
• Support
•  
• Distributors
• Employment
• News
• Offices
• Terms and Conditions

• 972.481.9223
• Fax 972.481.9209
• US Toll Free 877.736.8324
•  
• Sales

• English  
• Deutsch  
• Español  

Select Options  

• Specifications

• USB 2.0 Series

• Comparison

• Documents and Software

Name Specifications Model No STC-TC33USB-B Imager ⅓” Interline VGA Color Progressive CCD: ICX424AQ Total Picture Element 692 (H) x 504 (V) Active Picture Element 659 (H) x 494 (V) Chip Size 5.79 (H) x 4.89 (V) mm Cell Size 7.40 (H) x 7.40 (V) µm Scanning System Progressive Scanning Methods Full Scanning, 1/1 Partial Scanning, ½ Partial Scanning, ¼ Partial Scanning, Variable Partial Scanning Pixel Frequency 24.5454 MHz (Normal) / 12.2727 MHz (1/2 clock) / 6.13635 MHz (1/4 clock) Maximum Frame Rate - Full Scanning 59.94 fps (Normal) / 29.97 fps (1/2 clock) / 14.98 fps (1/4 clock) - 1/2 Partial 120.11 fps (Normal) / 60.05 fps (1/2 clock) / 30.02 fps (1/4 clock) - 1/4 Partial 240.22 fps (Normal) / 120.11 fps (1/2 clock) / 60.055 fps (1/4 clock) Resolution 640 (H) x 480 (V) (Full Scanning) 640 (H) x 224 (V) (1/2 Partial Scanning) 640 (H) 80 (V) (1/4 Partial Scanning) Minimum Scene Illumination 2.24 Lux at F1.2 Sync System Internal Electronic Shutter Auto / Manual (software selectable) Gain Auto / Manual (software selectable) Gamma Manual (software selectable) White Balance Auto / Manual / One shot (software selectable) Trigger Mode Free-run / Edge preset trigger / Pulse Width Trigger / Start & Stop Trigger (Software Selectable) Input / Output USB 2.0 High Speed Power - Input Voltage +5 V through USB connector - Consumption Less than 350 mA Dimensions 45 (W) x 45 (H) x ** (D) mm Lens Mount Available with C Mount, CS Mount, or fixed lens Interface Connector BM08B-SRSS-TB (JST) Weight Approximately 45g Temperature - Operational 0 to 40 deg C - Storage -30 to 65 deg C RoHS RoHS Compliant

 

 

 

USB 2.0 (Standard) Board
Color Mono Sensor Format Resolution FPS Size STC-TC33USB-B STC-TB33USB-B 1/3" VGA 640 x 480 60 45 x 45 x Var. mm STC-TC83USB-B STC-TB83USB-B 1/3" XGA 1024 x 768 30 45 x 45 x Var. mm STC-TC133USB-B STC-TB133USB-B 1/3" SXVGA 1280 x 960 22 45 x 45 x Var. mm STC-TC152USB-B STC-TB152USB-B 1/2" SXGA 1360 x 1024 20 45 x 45 x Var. mm STC-TC202USB-B STC-TB202USB-B 1/1.8" UXGA 1620 x 1236 15 45 x 45 x Var. mm
USB 2.0 (Standard) Cased
Color Mono Sensor Format Resolution FPS Size STC-TC33USB-A STC-TB33USB-A 1/3" VGA 640 x 480 60 51 x 51 x Var. mm STC-TC83USB-A STC-TB83USB-A 1/3" XGA 1024 x 768 30 51 x 51 x Var. mm STC-TC133USB-A STC-TB133USB-A 1/3" SXVGA 1280 x 960 22 51 x 51 x Var. mm STC-TC152USB-A STC-TB152USB-A 1/2" SXGA 1360 x 1024 20 51 x 51 x Var. mm STC-TC202USB-A STC-TB202USB-A 1/1.8" UXGA 1620 x 1236 15 51 x 51 x Var. mm

USB 2.0 (Ultra-Small)
Color Mono Sensor Format Resolution FPS Size STC-MC33USB STC-MB33USB 1/3" VGA 640 x 480 60 28 x 28 x 37 mm STC-MC83USB STC-MB83USB 1/3" XGA 1024 x 768 30 28 x 28 x 37 mm STC-MC133USB STC-MB133USB 1/3" SXVGA 1280 x 960 22 28 x 28 x 37 mm STC-MC152USB STC-MB152USB 1/2" SXGA 1360 x 1024 20 28 x 28 x 42 mm STC-MC202USB STC-MB202USB 1/1.8" UXGA 1620 x 1236 15 28 x 28 x 42 mm

USB 2.0 ("AH") Soft and Hard Triggering
(The USB signal is output over the USB connector)
Color Mono Sensor Format Resolution FPS Size STC-TC33USB-AH STC-TB33USB-AH 1/3" VGA 640 x 480 60 50 x 50 x 35.8 mm STC-TC83USB-AH STC-TB83USB-AH 1/3" XGA 1024 x 768 30 50 x 50 x 35.8 mm STC-TC133USB-AH STC-TB133USB-AH 1/3" SXVGA 1280 x 960 22 50 x 50 x 35.8 mm STC-TC152USB-AH STC-TB152USB-AH 1/2" SXGA 1360 x 1024 20 50 x 50 x 35.8 mm STC-TC202USB-AH STC-TB202USB-AH 1/1.8" UXGA 1620 x 1236 15 50 x 50 x 35.8 mm

USB 2.0 ("ASH") Soft and Hard Triggering
(The USB signal is output over the 12pin connector)
Color Mono Sensor Format Resolution FPS Size STC-TC33USB-ASH STC-TB33USB-ASH 1/3" VGA 640 x 480 60 50 x 50 x 35.8 mm STC-TC83USB-ASH STC-TB83USB-ASH 1/3" XGA 1024 x 768 30 50 x 50 x 35.8 mm STC-TC133USB-ASH STC-TB133USB-ASH 1/3" SXVGA 1280 x 960 22 50 x 50 x 35.8 mm STC-TC152USB-ASH STC-TB152USB-ASH 1/2" SXGA 1360 x 1024 20 50 x 50 x 35.8 mm STC-TC202USB-ASH STC-TB202USB-ASH 1/1.8" UXGA 1620 x 1236 15 50 x 50 x 35.8 mm

 

 

Comparison Chart
Model	TC33USB-B	TC83USB-B	TC133USB-B	TC152USB-B	TC202USB-B
Resolution	VGA (0.3MP)	XGA (0.8MP)	SXGA (1.25MP)	SXGA (1.3MP)	UXGA (2MP)
Image Sensor	1/3"	1/3"	1/3"	1/2"	1/1.8"
Frame Rate	60	30	22	19	15
Picture Element	648 x 480	1024 x 768	1280 x 960	1280 x 1024	1600 x 1200
Dimension	51 x 51 x 44.3

 

 

 

STC-TC33USB-B

VGA, Color Camera

 

Type	Software	Get	Notes
Drivers	StStream(v1.00.4140).zip		DirectX driver for USB series
Drivers	Driver_HALCON.zip		Halcon drivers for USB series
Drivers	Driver_LabView.zip		LabView driver for USB series
Drivers	Sentech-3.0.10.tgz		Linux driver for USB series
SDK's	NormalSDK(v1.10).zip		SDK (Software Development Kit) for Standard USB cameras
Software	StCamSWare(v1.10).zip		Viewing Software for the USB series

* Please contact your sales representative for this download.

 

 

Type	Documents	Get	Notes
Certification	RoHS_STC-TC33USB-BT_TC152USB-BT.pdf		RoHS Certificate for the STC-TC33USB-BT & STC-TC152USB-BT
Manuals	sofm_USB_de_v1.10.pdf		German Manual for USB Camera Viewing Software (StCamSWare)
Manuals	sofm_USB_es_v1.10.pdf		Spanish Manual for USB Camera Viewing Software (StCamSWare)
Manuals	sofm_USB_en_v1.10.pdf		English Manual for USB Camera Viewing Software (StCamSWare)
Manuals	sdkm_STD-USB_en_ver1.10.pdf		SDK Manual for Standard USB cameras
Manuals	sdkm_TRG-USB_en_ver1.06.pdf		SDK Manual for Trigger USB cameras
Specifications	spec_STC-TB_TC33USB_en_v1.4.pdf		Specification sheet for the 0.3MP (VGA) Standard USB cameras

* Please contact your sales representative for this download.

 

 

Terms and Licensing: USE OF THE SOFTWARE IS SUBJUCT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREING. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND. SENTECH SOFTWARE LICENSE TERMS: The following License Terms govern your use of the accompanying Software unless you have a separate written agreement with SENTECH. License Grant SENTECH grants you a license to Use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License. Ownership The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software. Copies and Adaptations You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system. No Disassembly or Decryption You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software. Transfer Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer. Termination SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form. US Government Restricted Rights