USB 2.0 Cameras

 
USB 2.0  ...  Resolutions  (VGA • XGA • SXGA • SXGA • UXGA)    
 
 

 

STC-TC33USB-AH

VGA, Color Camera

The STC-TC33USB-AH is a compact, progressive scan, VGA, USB cased camera with a 1/3” color CCD, featuring 60fps, software and hardware triggering, image capture, digital zoom and a feature-rich user based menu setup and control. This cased camera is the same as the "ASH" model except that the USB signal is output over the USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.

1/3" CCD Image Sensor, VGA (0.3 Megapixel)
Output over USB Connector, 60fps
Hardware & Software Trigger

 

Back    Front    Right    Left   

Select Options  
 

Name

Specifications

Model No
STC-TC33USB-AH
Imager
⅓” Interline VGA Color Progressive CCD: ICX424AQ
Total Picture Element
692 (H) x 504 (V)
Active Picture Element
640 (H) x 480 (V)
Chip Size
5.79 (H) x 4.89 (V) mm
Cell Size
7.40 (H) x 7.40 (V) µm
Scanning System
Progressive
Scanning Methods
Full Scanning, 1/1 Partial Scanning, Scanning, ½ Partial Scanning ¼ Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanning, Binning variable partial scanning
Pixel Frequency
24.5454 MHz
Maximum Frame Rate
- Full Scanning
59.94 fps
- 1/2 Partial
120.11 fps
- 1/4 Partial
240.22 fps
Resolution
640 (H) x 480 (V) (Full Scanning) 640 (H) x 224 (V) (1/2 Partial Scanning) 640 (H) x 80 (V) (1/4 Partial Scanning)
S/N Ratio (Standard Deviation)
≤ 10 digit (Factory Default Gain Setting)
Minimum Scene Illumination
0.08 Lux at F1.2
Sync System
Internal
Electronic Shutter
Auto / Manual (Software Selectable)
Gain
Auto / Manual (Software Selectable)
Gamma
Manual (Software Selectable)
White Balance
-
Trigger Mode
Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable)
Input / Output
USB2.0 High Speed (Mini B USB)
Power
- Input Voltage
+5V through USB connector or 12-pin connector
- Consumption
Less than 350 mA
Dimensions
50 (W) x 50 (H) x 35.8 (D) mm
Lens Mount
CS Mount
Input / Output Connector
12-pin connector (Hirose) / 2.5 mm pin jack
Tripod
1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top and bottom case, 2-M4 depth 4 screw holes on both sides of case
Weight
Approximately 115 g
Temperature
- Operational
0 to 40 deg C; Relative humidity: 0 to 85% (no condensation)
- Storage
-30 to 65 deg C; Relative humidity: 0 to 90% (no condensation)
Vibration
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy
EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS
RoHS Compliant
 
 
 

USB 2.0 (Standard) Board

ColorMonoSensorFormatResolutionFPSSize
STC-TC33USB-BSTC-TB33USB-B1/3"VGA640 x 4806045 x 45 x Var. mm
STC-TC83USB-BSTC-TB83USB-B1/3"XGA1024 x 7683045 x 45 x Var. mm
STC-TC133USB-BSTC-TB133USB-B1/3"SXVGA1280 x 9602245 x 45 x Var. mm
STC-TC152USB-BSTC-TB152USB-B1/2"SXGA1360 x 10242045 x 45 x Var. mm
STC-TC202USB-BSTC-TB202USB-B1/1.8"UXGA1620 x 12361545 x 45 x Var. mm

USB 2.0 (Standard) Cased

ColorMonoSensorFormatResolutionFPSSize
STC-TC33USB-ASTC-TB33USB-A1/3"VGA640 x 4806051 x 51 x Var. mm
STC-TC83USB-ASTC-TB83USB-A1/3"XGA1024 x 7683051 x 51 x Var. mm
STC-TC133USB-ASTC-TB133USB-A1/3"SXVGA1280 x 9602251 x 51 x Var. mm
STC-TC152USB-ASTC-TB152USB-A1/2"SXGA1360 x 10242051 x 51 x Var. mm
STC-TC202USB-ASTC-TB202USB-A1/1.8"UXGA1620 x 12361551 x 51 x Var. mm

USB 2.0 (Ultra-Small)

ColorMonoSensorFormatResolutionFPSSize
STC-MC33USBSTC-MB33USB1/3"VGA640 x 4806028 x 28 x 37 mm
STC-MC83USBSTC-MB83USB1/3"XGA1024 x 7683028 x 28 x 37 mm
STC-MC133USBSTC-MB133USB1/3"SXVGA1280 x 9602228 x 28 x 37 mm
STC-MC152USBSTC-MB152USB1/2"SXGA1360 x 10242028 x 28 x 42 mm
STC-MC202USBSTC-MB202USB1/1.8"UXGA1620 x 12361528 x 28 x 42 mm

USB 2.0 ("AH") Soft and Hard Triggering

(The USB signal is output over the USB connector)
ColorMonoSensorFormatResolutionFPSSize
STC-TC33USB-AHSTC-TB33USB-AH1/3"VGA640 x 4806050 x 50 x 35.8 mm
STC-TC83USB-AHSTC-TB83USB-AH1/3"XGA1024 x 7683050 x 50 x 35.8 mm
STC-TC133USB-AHSTC-TB133USB-AH1/3"SXVGA1280 x 9602250 x 50 x 35.8 mm
STC-TC152USB-AHSTC-TB152USB-AH1/2"SXGA1360 x 10242050 x 50 x 35.8 mm
STC-TC202USB-AHSTC-TB202USB-AH1/1.8"UXGA1620 x 12361550 x 50 x 35.8 mm

USB 2.0 ("ASH") Soft and Hard Triggering

(The USB signal is output over the 12pin connector)
ColorMonoSensorFormatResolutionFPSSize
STC-TC33USB-ASHSTC-TB33USB-ASH1/3"VGA640 x 4806050 x 50 x 35.8 mm
STC-TC83USB-ASHSTC-TB83USB-ASH1/3"XGA1024 x 7683050 x 50 x 35.8 mm
STC-TC133USB-ASHSTC-TB133USB-ASH1/3"SXVGA1280 x 9602250 x 50 x 35.8 mm
STC-TC152USB-ASHSTC-TB152USB-ASH1/2"SXGA1360 x 10242050 x 50 x 35.8 mm
STC-TC202USB-ASHSTC-TB202USB-ASH1/1.8"UXGA1620 x 12361550 x 50 x 35.8 mm
 
 
Comparison Chart
Model TC33USB-AH TC83USB-AH TC133USB-AH TC152USB-AH TC202USB-AH
Resolution VGA (0.3MP) XGA (0.8MP) SXGA (1.25MP) SXGA (1.3MP) UXGA (2MP)
Image Sensor 1/3" 1/3" 1/3" 1/2" 1/1.8"
Frame Rate 60 30 22 19 15
Picture Element 648 x 480 1024 x 768 1280 x 960 1280 x 1024 1600 x 1200
Dimension 50 x 50 x 35.8
 
 
 
STC-TC33USB-AH
VGA, Color Camera
 
TypeSoftwareGetNotes
DriversSentech-3.0.7.tgz1Linux driver for USB series
DriversDriver_LabView.zip1LabView driver for USB series
DriversStStream(v1.00.4140).zip1DirectX driver for USB series
DriversDriver_HALCON.zip1Halcon drivers for USB series
SDK'sNormalSDK(v1.10).zip1SDK (Software Development Kit) for Standard USB cameras
SDK'sTriggerSDK(v1.06).zip1SDK (Software Development Kit) for Hardware Trigger USB cameras
SoftwareStCamSWare(v1.10).zip1Viewing Software for the USB series
* Please contact your sales representative for this download.
 
 
TypeDocumentsGetNotes
Manualssofm_USB_en_v1.10.pdf1English Manual for USB Camera Viewing Software (StCamSWare)
Manualssdkm_STD-USB_en_ver1.10.pdf1SDK Manual for Standard USB cameras
Manualssdkm_TRG-USB_en_ver1.06.pdf1SDK Manual for Trigger USB cameras
Manualssofm_USB_de_v1.10.pdf1German Manual for USB Camera Viewing Software (StCamSWare)
Manualssofm_USB_es_v1.10.pdf1Spanish Manual for USB Camera Viewing Software (StCamSWare)
Specificationsspec_STC-TB_TC33USB_AH_en_v1.3.pdf1Specification sheet for the 0.3MP (VGA) USB "AH" cameras
* Please contact your sales representative for this download.
 
 

Terms and Licensing:

USE OF THE SOFTWARE IS SUBJUCT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREING. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND.
SENTECH SOFTWARE LICENSE TERMS:
The following License Terms govern your use of the accompanying Software unless you have a separate written agreement with SENTECH.
License Grant
SENTECH grants you a license to Use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License.
Ownership
The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination
SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
US Government Restricted Rights