USB 2.0 (Ultra-Small) Cameras

 
USB 2.0  ...  Resolutions  (VGA • XGA • SXGA • SXGA • UXGA)    
 
 

 

STC-MC83USB

XGA, Color Camera

The STC-MC83USB is an ultra-compact, progressive scan, XGA, USB camera with a 1/3” color CCD. It features 30fps, hardware and software triggering image capture, digital zoom and a feature-rich user based menu setup and control. The STC-MC83USB is a cased model available with a rear mini-USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.
1/3" CCD Image Sensor, XGA (0.8 Megapixel)
Ultra-Compact Size
Hardware & Software Trigger

 

Back    Front    Right    Left   

Select Options  
 

Name

Specifications
Model No
STC-MC83USB
Image Sensor
1/3” Interline XGA color progressive CCD: ICX204AK (Sony)
Total Picture Element
1077 (H) x 788 (V)
Effective Picture Element
1034 (H) x 779 (V)
Chip Size
5.80 (H) x 4.92 (V) mm
Cell Size
4.65 (H) x 4.65 (V) µm
Scanning System
Progressive
Resolution
1024 (H) x 768 (V) (Full scanning) 1024 (H) x 344 (V) (1/2 partial scanning) 1024 (H) x 136 (V) (1/4 partial scanning)
Scanning Methods
Full scanning, 1/1 partial scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning
Maximum Frame Rate
-
- Full Scanning
29.18 fps (Normal) / 14.59 fps (1/2 clock) / 7.295 fps (1/4 clock)
- 1/2 Partial Scanning
60.02 fps (Normal) / 30.01 fps (1/2 clock) / 15.00 fps (1/4 clock)
- 1/4 Partial Scanning
120.35 (Normal) / 60.175 fps (1/2 clock) / 30.087 fps (1/4 clock)
Pixel Frequency
29.5 MHz (Normal) / 14.75 MHz (1/2 clock) / 7.375 MHz (1/4 clock)
Video Output
8bit / 10bit / 12bit
Minimum Scene Illumination
21 Lux at F1.2
Sync System
Internal
Electronic Shutter
Auto / Manual (software selectable)
- Normal
1/29,500,000 to 1/29.18 seconds
- 1/2 Clock
1/14,750,000 to 1/14.59 seconds
- 1/4 Clock
1/7,375,000 to 1/7.30 seconds
Gain
Auto / Manual (software selectable)
Gamma
Manual (software selectable)
White Balance
Auto / Manual / One shot (software selectable)
Trigger Mode
Free-run / Edge preset trigger / Pulse width trigger / Start & stop trigger (software selectable)
Input / Output
USB 2.0 High Speed
Power
-
- Input Voltage
+5 Vdc through USB connector (+4.4 to +5.25V)
- Consumption
< 300 mA
Dimensions
28 (W) x 28 (H) x 42 (D) mm (excluding connector)
Lens Mount
C mount
Weight
Approximately 45g
Interface Connector
USB: mini-B USB connector IO signal: 6pin connector (HR10A-7R-6PB or equivalent)
Temperature
-
- Operational
0 ~ 40 deg. C
- Storage
-30 ~ 65 deg. C
Vibration
20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy
EMS: En61000-6-2, EMI: EN61000-6-3 (Class B)
RoHS
RoHS Compliant
 
 
 

USB 2.0 (Standard) Board
ColorMonoSensorFormatResolutionFPSSize
STC-TC33USB-BSTC-TB33USB-B1/3"VGA640 x 4806045 x 45 x Var. mm
STC-TC83USB-BSTC-TB83USB-B1/3"XGA1024 x 7683045 x 45 x Var. mm
STC-TC133USB-BSTC-TB133USB-B1/3"SXVGA1280 x 9602245 x 45 x Var. mm
STC-TC152USB-BSTC-TB152USB-B1/2"SXGA1360 x 10242045 x 45 x Var. mm
STC-TC202USB-BSTC-TB202USB-B1/1.8"UXGA1620 x 12361545 x 45 x Var. mm

USB 2.0 (Standard) Cased
ColorMonoSensorFormatResolutionFPSSize
STC-TC33USB-ASTC-TB33USB-A1/3"VGA640 x 4806051 x 51 x Var. mm
STC-TC83USB-ASTC-TB83USB-A1/3"XGA1024 x 7683051 x 51 x Var. mm
STC-TC133USB-ASTC-TB133USB-A1/3"SXVGA1280 x 9602251 x 51 x Var. mm
STC-TC152USB-ASTC-TB152USB-A1/2"SXGA1360 x 10242051 x 51 x Var. mm
STC-TC202USB-ASTC-TB202USB-A1/1.8"UXGA1620 x 12361551 x 51 x Var. mm

USB 2.0 (Ultra-Small)
ColorMonoSensorFormatResolutionFPSSize
STC-MC33USBSTC-MB33USB1/3"VGA640 x 4806028 x 28 x 37 mm
STC-MC83USBSTC-MB83USB1/3"XGA1024 x 7683028 x 28 x 37 mm
STC-MC133USBSTC-MB133USB1/3"SXGA1280 x 9602228 x 28 x 37 mm
STC-MC152USBSTC-MB152USB1/2"SXGA1360 x 10241928 x 28 x 42 mm
STC-MC202USBSTC-MB202USB1/1.8"UXGA1620 x 12361528 x 28 x 42 mm

USB 2.0 ("AH") Soft and Hard Triggering
(The USB signal is output over the USB connector)
ColorMonoSensorFormatResolutionFPSSize
STC-TC33USB-AHSTC-TB33USB-AH1/3"VGA640 x 4806050 x 50 x 35.8 mm
STC-TC83USB-AHSTC-TB83USB-AH1/3"XGA1024 x 7683050 x 50 x 35.8 mm
STC-TC133USB-AHSTC-TB133USB-AH1/3"SXVGA1280 x 9602250 x 50 x 35.8 mm
STC-TC152USB-AHSTC-TB152USB-AH1/2"SXGA1360 x 10242050 x 50 x 35.8 mm
STC-TC202USB-AHSTC-TB202USB-AH1/1.8"UXGA1620 x 12361550 x 50 x 35.8 mm

USB 2.0 ("ASH") Soft and Hard Triggering
(The USB signal is output over the 12pin connector)
ColorMonoSensorFormatResolutionFPSSize
STC-TC33USB-ASHSTC-TB33USB-ASH1/3"VGA640 x 4806050 x 50 x 35.8 mm
STC-TC83USB-ASHSTC-TB83USB-ASH1/3"XGA1024 x 7683050 x 50 x 35.8 mm
STC-TC133USB-ASHSTC-TB133USB-ASH1/3"SXVGA1280 x 9602250 x 50 x 35.8 mm
STC-TC152USB-ASHSTC-TB152USB-ASH1/2"SXGA1360 x 10242050 x 50 x 35.8 mm
STC-TC202USB-ASHSTC-TB202USB-ASH1/1.8"UXGA1620 x 12361550 x 50 x 35.8 mm
 
 

Type

Part No.

Description
Cable
CAB-USB-1.8MB
USB 2.0 Cable, 1.8 meter (6 ft.), Standard A & Mini B Connectors
Cable
CAB-USB-2LMB
USB 2.0 Cable, 2.0 meter(6.5 ft), Standard A & Mini B Connector with Lock Down to Camera
Cable
CAB-USB-3MB
USB 2.0 Cable, 3.0 meter (10 ft.), Standard A & Mini B Connectors
Cable
CAB-USB-3LMB
USB 2.0 Cable, 3.0 meter(10 ft.), Standard A & Mini B Connector with Lock Down to Camera
Cable
CAB-USB-5LMB
USB 2.0 Cable, 5.0 meter(16.4 ft.), Standard A & Mini B Connector with Lock Down to Camera
Lens Mount
C-ADPTR
C-Mount adaptor for CS-mount Cameras
Programming JIG
TP-HCA
Camera Mount for Cube Cameras, includes 6 mounting Screws
 
 
 
 
Mechanical
 
STC-MC83USB
XGA, Color Camera
 
DownloadTypeSoftwareNotes
1DriversDriver_HALCON.zipHalcon driver for USB series
1DriversSentech-3.1.5.tgzLinux driver for USB series
1DriversStStream(v1.02.4516).zipDirectX driver for USB series
1SDK'sStandardSDK(v3.01-1).zipSDK (Software Development Kit) for Standard USB cameras
1SDK'sTriggerSDK(v3.01-1).zipSDK (Software Development Kit) for Hardware Trigger USB cameras
1SoftwareStCamSWare(v3.02).zipViewing Software for the USB series
* Please contact your sales representative for this download.
 
 
DownloadTypeDocumentsNotes
1Manualssdkm_TRG-USB_en_ver1.06.pdfSDK Manual for Trigger USB cameras
1Manualssdkm_STD-USB_en_ver1.10.pdfSDK Manual for Standard USB cameras
1Manualssofm_USB_en_v1.10.pdfSoftware Manual for StCamSWare (USB Viewing Software)
1Manualssofm_USB_de_v1.10.pdfGerman Manual for USB Camera Viewing Software (StCamSWare)
1Manualssofm_USB_es_v1.10.pdfSpanish Manual for USB Camera Viewing Software (StCamSWare)
1Manualssofm_USB_pr_v1.10.pdfPortuguese Manual for USB Camera Viewing Software (StCamSWare)
1Specificationsspec_STC-MC_MB_en_v1.02.pdfSpecification sheet for the Mini USB cameras
* Please contact your sales representative for this download.
 
 

Terms and Licensing:

USE OF THE SOFTWARE IS SUBJECT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREIN. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND.
SENTECH SOFTWARE LICENSE TERMS:
The following License Terms govern your Use of the accompanying Software unless you have a separate written agreement with SENTECH.
License Grant
SENTECH grants you a license to use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License.
Ownership
The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination
SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
US Government Restricted Rights