Progressive Scan (Raw Digital Output)

 
Progressive Scan ...  Resolutions  (VGA • XGA • SXGA • UXGA)    
 
 

 

STC-BC33A

VGA, Color Camera

The STC-BC33A is a 1/3" color CCD, digital raw data output board camera with 648 (H) x 494 (V) resolution. This series features a VGA sensor with a scan rate of 30, 60 and 90fps, digital raw data output and variable integration shutter trigger.
1/3" CCD Image Sensor
VGA (0.3 MegaPixel), 90fps
Raw Digital Output (Low Volt TTL)

 

Back    Front    Right    Left   

Select Options  
 

Name

Specifications
Model No
STC-BC33A
Imager
⅓” Interline VGA Color Progressive CCD: ICX424AQ
Total Picture Element
692 (H) x 504 (V)
Active Picture Element
VGA: 648 (H) x 494 (V)
Chip Size
5.79 (H) x 4.89 (V) mm
Cell Size
7.4 (H) x 7.4 (V) µm
Scanning System
Progressive
Scanning Method
Full Scanning, Partial Full Scanning, ½ Partial Scanning, ¼ Partial Scanning, Variable Partial Scanning
Vertical Frequency (Frame Rate)
31.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hz
Horizontal Frequency
15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHz
Pixel Frequency
12.2727 (30fps) / 24.5454 (60fps) / 36.8181 (90fps) MHz
S/N Ratio
- @ 8Bit Output
≤ 3 Digit (Gain 0 dB)
- @ 10Bit Output
≤ 10 Digit (Gain 0 dB)
Minimum Scene Illumination
0.13 Lux at F1.2
Sync System
Internal / External
Video Output
Digital 8 or 10 bit parallel low voltage output
Tap
1 Tap
Shutter Speed
OFF, 1/3 to 1/40,000 seconds (Variable at every H and clock) (30fps) OFF, 1/7 to 1/80,000 seconds (Variable at every H and clock) (60fps) OFF, 1/11 to 1/120,000 seconds (Variable at every H and clock) (90fps)
Gain
0 to 27 dB
Gamma
1.0
Power
- Input Voltage
12Vdc ± 10%
- Consumption
Less than 1.8 W
Trigger Mode
Edge Preset Trigger (V-reset, Non-reset) Pulse Width Trigger (V-reset, Non-reset)
Communication
RS232 via DF12-36DS-0.5V connector
Dimensions
28 (W) x 28 (H) x 33 (D) mm
Optical Filter
No IR Cut Filter
Optical Center Accuracy
Positional Accuracy in H and V Directions: +/- 0.31 mm Rotational Accuracy of H and V: +/- 2.1 deg.
Material
- Case
Aluminum Die Cast (ADC12)
- Tripod
Polycarbonate ABS
Lens Mount
C Mount
Interface Connector
DF12-36DS-0.5V (Hirose)
Tripod
Tripod can be attached with 4 screws to the bottom plate
Weight
Approximately 26g
Temperature and Humidity
- Operational
It depends on 1) the assembly of the system and 2) how that system manages heat conditions
- Storage
Temperature: -30 to 65⁰C; Relative Humidity: 0 to 90% (No Condensation)
RoHS
RoHS Compliant
 
 
 

Raw Digital Output Models
ColorMonoSensorFormatResolutionFPSSize
STC-BC33ASTC-B33A1/3"VGA648 x 49430, 60, 9028 x 28 x 43.6 mm
STC-BC83ASTC-B83A1/3"XGA1024 x 7683028 x 28 x 43.6 mm
STC-BC152ASTC-B152A1/2"SXGA1360 x 102415, 1928 x 28 x 43.6 mm
STC-BC202ASTC-B202A1/1.8UXGA1620 x 12361528 x 28 x 43.6 mm
 
 
Comparison Chart
Models BC33A BC83A BC152A BC202A
Resolution VGA (0.3MP) XGA (0.8MP) SXGA (1.3MP) UXGA (2MP)
Image Sensor 1/3" 1/3" 1/2" 1/1.8"
Frame Rate 30,60, 90 30 15, 19 15
Picture Element 648 x 494 1024 x 768 1360 x 1040 1620 x 1220
Dimension 28 x 28 x 33 mm
 
 
 
STC-BC33A
VGA, Color Camera
 
TypeSoftwareGetNotes
SoftwareCLCtrl2 ver1.0.0.0 *Control Software for the Raw Digital Output series
* Please contact your sales representative for this download.
 
 
TypeDocumentsGetNotes
Specificationsspec_RawDigitalOutput_en_v1.3.pdf1Specification sheet for the Raw Digital Output camera series
User Guidesusers_STC-B33A_BC33A_en_v1.0.pdf1User Guide for the 1.3MP (SXGA) Raw Digital Output camera
* Please contact your sales representative for this download.
 
 

Terms and Licensing:

USE OF THE SOFTWARE IS SUBJUCT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREING. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND.
SENTECH SOFTWARE LICENSE TERMS:
The following License Terms govern your use of the accompanying Software unless you have a separate written agreement with SENTECH.
License Grant
SENTECH grants you a license to Use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License.
Ownership
The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination
SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
US Government Restricted Rights