• Auto Focus Block
• Analog
• CameraLink
• GigE
• High Definition
• Progressive Scan
• Specialty
• USB 2.0 and 3.0
•  
• Closeout Inventory
• Warranties

• Lens Calculator

• Catalog
• Documentation
• Software

• Directory
• Engineering
• Sales
• Support
•  
• Distributors
• Employment
• News
• Offices
• Terms and Conditions

• 972.481.9223
• Fax 972.481.9209
• US Toll Free 877.736.8324
•  
• Sales

• Deutsch  
• English  
• Español  
• Português  

Select Options  

• Specifications

• Progressive Scan Series

• Comparison

• Mechanical Drawings

• Documents and Software

Name Specifications Model No STC-A33A Imager 1/3” Interline VGA Monochrome Progressive CCD: ICX424AL Total Picture Element 692 (H) x 504 (V) Effective Picture Element 659 (H) x 494 (V) Active Picture Element VGA: 648 (H) x 494 (V) Chip Size 5.79 (H) x 4.89 (V) mm Cell Size 7.4 (H) x 7.4 (V) µm Scanning System Progressive Scanning Method Full Scanning, Partial Full Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning, Binning, Binning Partial Scanning Binning 1/2 Partial Scanning, Binning 1/4 Partial Scanning Binning Variable Partial Scanning Vertical Frequency 31.47 (30 fps) / 62.94 (60 fps) / 94.784 (90 fps) Hz Horizontal Frequency 15.7343 (30 fps) / 31.4685 (60 fps) / 47.2028 (90 fps) kHz Pixel Frequency 12.2727 (30 fps) / 24.5454 (60 fps) / 36.8181 (90 fps) MHz S/N Ratio (Standard Deviation) 56 dB (GAIN 0 dB) Minimum Scene Illumination 1 Lux at F1.4 Sync System Internal / External Video Output 1.0 Vp-p / 75 Ω, DC Coupling (0V) Shutter Speed - - Dip Switch OFF; 1/200; 1/500; 1/1,000; 1/2,000; 1/4,000; 1/8,000; 1/20,000 second - Communication OFF; ½ to 1/100,000 sec. (Variable at every H and Clock) Gain 0 to 27 dB Gamma 1.0 / 0.45 Power Supply - - Input Voltage 12 Vdc ± 10% - Consumption Less than 1.8 W Trigger Mode Edge Preset Trigger (V-reset, Non-reset) Pulse Width Trigger (V-reset, Non-reset) Communication RS232 via 12 Pin Connector Dimensions 28(W) x 28(H) x 46.3(D) mm including lens mount and connector Optical Filter No IR Cut Filter Optical Center Accuracy Positional Accuracy in H and V directions: +/- 0.31mm Material - - Case Front, Base, and Rear: Aluminum Die Cast (ADC12) Cover: Steel Sheet Covered with Zinc - Tripod Polycarbonate ABS Lens Mount C Mount Interface Connector HR10A-10R-12PB (Hirose) or equivalent Tripod Tripod can be attached to 4 plates (4 screws on the bottom plate, 3 screws on the other 3 plates) Weight Approximately 52g (Camera: 43g, Tripod: 9g) Temperature and Humidity - Operational Temperature: -5 to 50 deg. C; Relative Humidity: 0 to 85% (No Condensation) - Storage Temperature: -30 to 65 deg. C; Relative Humidity: 0 to 90% (No Condensation) Vibration 20 Hz to 200 Hz to 20 Hz (5 min. /cycle), Acceleration 10G, 3 Directions 30 Minutes Each Shock Acceleration 70G, Half Amplitude 6 ms, 3 Directions 3 Times Each Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B) RoHS RoHS Compliant

 

 

 

 

Progressive Scan Series Board, Cased, Cube and Remote Head Models Sentech’s line of Progressive Scan analog Machine Vision cameras is powerful and versatile. This line up starts with our Cube Cameras series. The case of these cameras are approximately a one inch cube. They feature VGA (0.3MP) to UXGA (2MP) resolutions with full machine vision functionality. Next in the line up are the “SS” series of remote head cameras. These are high speed VGA cameras with a very small remote head for applications where weight, space and inertia control are critical. Finally, Sentech offers a board version with a face dimension of 30 x 30mm featuring full MV functionality.

Board Cameras (Compact)
Mono Sensor Format Resolution Lens Mount FPS Size STC-33 1/3" VGA 648 x 494 CS Mount 30, 60 30 x 30 x 32 mm STC-83 1/3" XGA 1024 x 768 CS Mount 30 30 x 30 x 32 mm

 

Cased Cube Cameras (Compact)
Mono Sensor Format Resolution Lens Mount FPS Size STC-A33A 1/3" VGA 648 x 494 CS Mount 30, 60, 90 28 x 28 x 46.3 mm STC-A83A 1/3" XGA 1024 x 768 CS Mount 30 28 x 28 x 46.3 mm STC-A152A 1/2" SXGA 1360 x 1040 CS Mount 15, 19 28 x 28 x 46.3 mm STC-A202A 1/1.8" UXGA 1620 x 1220 CS Mount 15 28 x 28 x 46.3 mm

 

Cased Cameras (Remote Head)
Mono Sensor Format Resolution Lens Mount FPS Size STC-SS1200 1/3" VGA 648 x 494 Special Mount 60 110 x 80 x 28 mm STC-SS1200-90 1/3" VGA 648 x 494 Special Mount 90 110 x 80 x 28 mm

 

 

Comparison Chart
Models	A33A	A83A	A152A	A202A
Image Sensor	1/3"	1/3"	1/2"	1/1.8"
Resolution	VGA	XGA	SXGA	UXGA
Resolution	648 x 494	1024 x 768	1360 x 1040	1620 x 1220
Frame Rate	30, 60, 90	30	15, 19	15
Dimension	28 x 28 x 46.3 mm

 

 

 

STC-A33A

Progressive Scan, VGA, Cube

 

Download	Type	Software	Notes
	Software	CLCtrl2_v1.02.zip	Control Software for the Cube Progressive Scan series.

* Please contact your sales representative for this download.

 

 

Download	Type	Documents	Notes
	Certification	CE_ProgressiveScan_AxxA.pdf	CE Declaration for the Cube Progressive Scan series (STC-AxxA)
	Certification	RoHS_STC-A33A.pdf	RoHS certificate for the STC-A33A
	Specifications	spec_STC-A33A_en_v2.1.pdf	Specification sheet for the STC-A33A camera
	User Guides	users_STC-A33A_en_v1.0.pdf	User Guide for the STC-A33A camera

* Please contact your sales representative for this download.

 

 

Terms and Licensing: USE OF THE SOFTWARE IS SUBJECT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREIN. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND. SENTECH SOFTWARE LICENSE TERMS: The following License Terms govern your Use of the accompanying Software unless you have a separate written agreement with SENTECH. License Grant SENTECH grants you a license to use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License. Ownership The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software. Copies and Adaptations You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system. No Disassembly or Decryption You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software. Transfer Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer. Termination SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form. US Government Restricted Rights