Progressive Scan (Board)

 
Progressive Scan  ...  Resolutions  (VGA • XGA)    
 
 

 

STC-83

Progressive Scan, XGA, Board

The STC-83 is a full featured, low cost, XGA progressive scan machine vision board camera with a 1/3" monochrome CCD. The STC-83 features a full frame 30fps XGA output, partial scanning, triggering and reset capabilities.

1/3" XGA Progressive Scan CCD
HD/VD Sync.
Reset Trigger

 

Back   

Select Options  
 

Name

Specifications
Model
STC-83
Resolution
⅓" Interline CCD (ICX204AL)
Image Sensor
XGA (0.8 MegaPixel)
Signal Format
Monochrome Progressive Analog
Frame Rate
30fps
Effective Picture Element
1034 (H) x 779 (V)
Active Picture Element
1024 (H) x 768 (V)
Chip Size (mm)
5.80 (H) x 4.92 (V) mm
Cell Size (µm)
4.65 (H) x 4.65 (V) µm
Vertical Frequency
29.18 Hz
Horizontal Frequency
23.228 kHz
Scanning Method
Full Scan, Partial Full Scan, Partial Scan (½, ¼), Binning, Binning Partial Scan (1/1, ½, ¼)
Sync System
Internal and External (HD/VD) Automatically
Trigger Shutter
Pulse Width Trigger (3~1/100,000 second) Edge Preset Trigger (10 Steps)
Electronic Shutter
1/30 ~ 1/16,000 Second (10 Steps) 1/60 ~ 1/32,000 Second (10 Steps at Double Speed)
Minimum Illumination
0.8 Lux @ F1.2, 20 IRE; 0.14 Lux @ F1.2, 50 IRE (Gain ON)
Gain
AGC / Manual (4 to 24 dB)
S/N Ratio
50dB (Gain 0dB)
Gamma
1.0
Lens Mount
CS Mount
Video Output
1Vp-p 75Ω
Shock
70G (3 directions, 3 times each)
Vibration
10G (20 to 200 Hz)
Power
- Input Voltage
DC 12V ± 10%
- Consumption
1.56W, 130mA
Operating Temperature
-10~45 deg C
Dimensions
30 (W) x 30 (H) x 32 (D)mm (1.2” x 1.2” x 1.28”)
Weight
27g (.95 oz.)
 
 
 
 

Progressive Scan Series

Board, Cased, Cube and Remote Head Models

Sentech’s line of Progressive Scan analog Machine Vision cameras is powerful and versatile. This line up starts with our Cube Cameras series. The case of these cameras are approximately a one inch cube. They feature VGA (0.3MP) to UXGA (2MP) resolutions with full machine vision functionality. Next in the line up are the “SS” series of remote head cameras. These are high speed VGA cameras with a very small remote head for applications where weight, space and inertia control are critical. Finally, Sentech offers a board version with a face dimension of 30 x 30mm featuring full MV functionality.

Board Cameras (Compact)
MonoSensorFormatResolutionLens MountFPSSize
STC-331/3"VGA648 x 494CS Mount30, 6030 x 30 x 32 mm
STC-831/3"XGA1024 x 768CS Mount3030 x 30 x 32 mm
 

Cased Cube Cameras (Compact)
MonoSensorFormatResolutionLens MountFPSSize
STC-A33A1/3"VGA648 x 494CS Mount30, 60, 9028 x 28 x 46.3 mm
STC-A83A1/3"XGA1024 x 768CS Mount3028 x 28 x 46.3 mm
STC-A152A1/2"SXGA1360 x 1040CS Mount15, 1928 x 28 x 46.3 mm
STC-A202A1/1.8"UXGA1620 x 1220CS Mount1528 x 28 x 46.3 mm
 

Cased Cameras (Remote Head)
MonoSensorFormatResolutionLens MountFPSSize
STC-SS12001/3"VGA648 x 494Special Mount60110 x 80 x 28 mm
STC-SS1200-901/3"VGA648 x 494Special Mount90110 x 80 x 28 mm
 
 
Comparison Chart
Models 33 83
Image Sensor 1/3" 1/3"
Resolution VGA XGA
Resolution 648 x 494 1024 x 768
Frame Rate 30, 60 30
Dimension 30 x 30 x 32 mm
 
 
Mechanical
 
STC-83
Progressive Scan, XGA, Board
 
* Please contact your sales representative for this download.
 
 
DownloadTypeDocumentsNotes
1Specificationsspec_STC-83_en_v1.0.pdfSpecification Sheet for the STC-83 camera
* Please contact your sales representative for this download.
 
 

Terms and Licensing:

USE OF THE SOFTWARE IS SUBJECT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREIN. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND.
SENTECH SOFTWARE LICENSE TERMS:
The following License Terms govern your use of the accompanying Software unless you have a separate written agreement with SENTECH.
License Grant
SENTECH grants you a license to Use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License.
Ownership
The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination
SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
US Government Restricted Rights