Analog (NTSC/PAL) Cameras

 
Analog Series  ...  Image Senor 1/4" (NTSC • PAL)    
 
STC-N64
 

 

STC-P64

2:1 Interlace, PAL, Board

The STC-P64 is a low cost, high resolution, PAL, micro board camera with a 1/4" color CCD. The size is only 26 (W) x 22 (H) mm and the STC-N64 features a 10-Bit DSP, selectable Normal/Mirror mode and an Internal Sync System.

White Balance: Auto, Manual & Push-to-Set
10-bit DSP
PAL, 1/4" Color CCD, 480 TVL

 

Back    Front   

Select Options  
 

Name

Specifications
Model No
STC-P64
Imager
1/4" PAL high resolution Interline CCD (Sony: ICX649BKA)
Active Picture Element
752 (H) x 582 (V)
Chip Size
4.34 (H) x 3.69 (V)mm
Cell Size
4.85 (H) x 4.65 (V) µm
Scanning System
2:1 Interlace
Horizontal Frequency
15.625 kHz
Vertical Frequency
50.00 MHz
Electronic Shutter
Programmable via Serial Communication
Sync System
Internal
Horizontal Resolution
480 TV Lines
Video Output
VBS 1.0 Vp-p 57 Ohm
Minimum Scene Illumination
0.54 Lux at F1.2
S/N Ratio
More than 48 dB
Electronic Shutter
Electronic Iris (1/50 to 1/100,000 seconds) (adjustable via the communication)
Gain
AGC ON (adjustable via the communication)
Gamma
0.45 (Adjustable via the communication)
White Balance
Auto white balance (2,800 to 7,000K) (Adjustable via the communication)
Mirror Image
Normal Image / Horizontal Image
Power
- Input Voltage
+5 to +12 Vdc
- Consumption
<0.6 W
Dimensions
26 (W) x 22 (H) x Var. (D) mm (excluding connectors)
Optical Filter
includes IR cut filter
Lens Mount
CS mount / Fixed lens / Pin hole lens / Without lens
Weight
Approximately 70g
Operating Temperature
Environmental temperature: -10 to 50 deg. C
Storage Temperature
Environmental temperature: -20 to 60 deg. C
RoHS
RoHS Compliant
 
 
 
 

Color Cameras (NTSC / PAL)

2:1 Interlace Board Cameras

High quality, high performance, highly reliable Industrial Grade 2:1 Interlace CCD machine vision board cameras.

Board Models
Model Sensor Format Horizontal Resolution Picture Element FPS Size
STC-N64 1/4" NTSC 470 TV Line 768 (H) x 494 (V) 30 26 x 22 x Var. mm
STC-P64 1/4" PAL 480 TV Lines 752 (H) x 582 (V) 30 26 x 22 x Var. mm
STC-N63 1/3" NTSC 470 TV Line 768 (H) x 494 (V) 30 32 x 32 x Var. mm
STC-P63 1/3" PAL 480 TV Lines 752 (H) x 582 (V) 30 32 x 32 x Var. mm
Cased Models
STC-N63 1/3" NTSC 470 TV Line 768 (H) x 494 (V) 30 32 x 32 x Var. mm
STC-P63 1/3" PAL 480 TV Lines 752 (H) x 582 (V) 30 32 x 32 x Var. mm
 
 
Comparison Chart
Models N64 P64 N63 P63
Format NTSC PAL NTSC PAL
Image Sensor 1/4" 1/4" 1/3" 1/3"
Horizontal Resolution 480 TV Lines
Picture Element 768 x 494 752 x 582 768 x 494 752 x 582
Dimension 26 x 22 x Var. mm 32 x 32 x Var. mm
 
 
 
STC-P64
2:1 Interlace, PAL, Board
 
DownloadTypeSoftwareNotes
1SoftwareMNDSPCtrl(v0.17).zipControl Software for the Analog, 2:1 Interlace camera (Panasonic DSP)
* Please contact your sales representative for this download.
 
 
DownloadTypeDocumentsNotes
1Specificationsspec_STC-N54_N64_P54_P64_en_v1.0.pdfSpec Sheet for the NTSC and PAL CCD Board Camera
1User Guidesusers_JIG-ColorUSB_en_v1.1.pdfUser Guide of the Programming Interface JIG
* Please contact your sales representative for this download.
 
 

Terms and Licensing:

USE OF THE SOFTWARE IS SUBJECT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREIN. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND.
SENTECH SOFTWARE LICENSE TERMS:
The following License Terms govern your Use of the accompanying Software unless you have a separate written agreement with SENTECH.
License Grant
SENTECH grants you a license to use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License.
Ownership
The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination
SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
US Government Restricted Rights