GigE Cameras

 
GigE Series  ...  Resolutions  (VGA • XGA • SXGA • UXGA)    
 
 

 

STC-POGE83A

XGA, Monochrome Camera

The STC-POGE83A is part of Sentech's Power Over Ethernet GigE camera line. It features a 1/3" monochrome XGA sensor, 36fps and communication over a 12 pin Hirose or Ethernet connector. The STC-POGE83A boasts precision housing with accurate CCD alignment, a DC Auto Iris Lens Driver, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam™.
1/3" CCD Image Sensor
XGA (0.8 Megapixel), 36fps
PoE (Power Over Ethernet)

 

Back    Front    Right    Left   

Select Options  
 

Name

Specifications
Model No
STC-POGE83A
Imager
⅓” Interline XGA monochrome progressive CCD: ICX204AL
Total Picture Element
1077 (H) x 788 (V)
Active Picture Element
XGA: 1024 (H) x 768 (V)
Chip Size
5.5 (H) x 4.92 (V) mm
Cell Size
4.65 (H) x 4.65 (V) µm
Scanning System
Progressive
Vertical Frequency (Frame Rate)
36.42113 Hz at full resolution 0.44238 to 147.16356 Hz adjustable via the communication Max. frame rate depends on the AOI setting Max. frame rate of the camera(147.16356) is 146 vertical resolution AOI setting
Horizontal Frequency
28.9907 kHz
Pixel Frequency
36.818175 MHz
Noise Level
- @ 8bit output
≤ 3 Digit (Gain 0 dB)
- @ 10bit output
≤ 12 Digit (Gain 0 dB)
- @ 12bit output
≤ 48 Digit (Gain 0 dB)
Minimum Scene Illumination
24.70 Lux at F1.2, 36.42113 Hz
Sync System
Internal
Video Output
Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
Interface
PoE: IEEE802.3af CLASS3(1000BASE-T)
Protocol
GigE Vision® 1.2 and GenICam™ 2.0 compliant
Shutter Speed
Preset continuous mode: 10 useconds to 17,666,216 useconds Preset trigger mode: 10 useconds to 17,666,216 useconds Pulse width mode: 10 useconds to Unlimited
ALC
Auto iris lens, electronic iris and AGC (ON/OFF)
Gain
0 to 20.4 dB
Gamma
Gamma 1.0 (Factory default) or downloadable gamma table
AOI Function
Programmable AOI setting via the communication
Smear Reduction
Selectable ON/OFF via the communication
Color Interpolation
Available on RGB output
White Balance Function
Auto, manual and push-to-set white balance is available on both Raw data output and RGB output
Trigger Mode
Edge preset trigger, Pulse width trigger (unlimited long exposure)
Communication
UART communication through Ethernet port
I/Os
3 opto-isolated inputs and 5 opto-isolated outputs
Auto IRIS lens control
DC IRIS control input with video level target, peak/average and zone weight settings via the communication
Power
- Input Voltage
+10.8 to +26.4 Vdc through power/IO connector or Power Over Ethernet (Auto detection with power/IO connector prioritized)
- Consumption
Less than 4.5 W
Dimensions
50 (W) x 50 (H) x 53.5 (D) mm excluding connectors
Optical Filter
IR cut filter on
Optical Center Accuracy
Positional accuracy in H and V directions: +/- 0.3 mm Rotational accuracy of H and V: +/- 1.5 deg.
Material
Aluminum (AC)
Lens Mount
C mount
Connectors
RJ45 connector Power/IO connector: HR10A-10R-12PB (Hirose) or equivalent DC IRIS lens connector: M1951 (EMUDEN) or equivalent
Camera Mount Screws
Two 1/4” Tripod screw holes: (One on each top and bottom plate), Sixteen M4 screws holes: (Four each on top, bottom, and both side plates)
Weight
Approximately 170 g
Operating Temperature
-5 ~ 40 deg C
Storage Temperature
-30 ~ 65 deg C
Vibration
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 38G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy
TBD
RoHS
RoHS Compliant
 
 
 

GigE (Standard) Models
ColorMonoSensorFormatResolutionFPSSize
STC-GEC33ASTC-GE33A1/3"VGA648 x 4949035 x 35 x 50.6 mm
STC-GEC83ASTC-GE83A1/3"XGA1024 x 7683635 x 35 x 50.6 mm
STC-GEC133ASTC-GE133A1/3"SXVGA1280 x 9663935 x 35 x 50.6 mm
STC-GEC152ASTC-GE152A1/2"SXGA1360 x 10401935 x 35 x 50.6 mm
STC-GEC202ASTC-GE202A1/1.8"UXGA1624 x 12361535 x 35 x 50.6 mm
STC-GEC500ASTC-GE500A2/3"QSXGA2448 x 20581535 x 35 x 50.6 mm

GigE (Standard) Power Over Ethernet Models
ColorMonoSensorFormatResolutionFPSSize
STC-POGEC33ASTC-POGE33A1/3"VGA648 x 4949050 x 50 x 53.5 mm
STC-POGEC83ASTC-POGE83A1/3"XGA1024 x 7683650 x 50 x 53.5 mm
STC-POGEC152ASTC-POGE152A1/2"SXGA1360 x 10401950 x 50 x 53.5 mm
STC-POGEC202ASTC-POGE202A1/1.8"UXGA1624 x 12361550 x 50 x 53.5 mm
 
 
Comparison Chart
Models POGE33A POGE83A POGE152A POGE202A
Resolution VGA (0.3MP) XGA (0.8MP) SXGA (1.3MP) UXGA (2MP)
Image Sensor 1/3" 1/3" 1/2" 1/1.8"
Frame Rate 30, 60, 90 36 19 15
Picture Element 648 x 494 1024 x 768 1360 x 1024 1620 x 1220
Dimension 50 x 50 x 53.5
 
 
Mechanical
 
STC-POGE83A
XGA, Monochrome Camera
 
DownloadTypeSoftwareNotes
SoftwareStGigE_Package_v1.04.0002 *Please contact sales representative for latest copy of the GigE software.
* Please contact your sales representative for this download.
 
 
DownloadTypeDocumentsNotes
1Protocolprot_PoE_en_v1.4.pdfProtocol Manual for the PoE GigE camera series
1Specificationsspec_STC-GE_PoE_en_v1.8.pdfSpecification sheet for the PoE GigE camera series
1User Guidesusers_STC-POGE_POGEC83A_en_v1.01.pdfUser guide for the XGA PoE GigE
* Please contact your sales representative for this download.
 
 

Terms and Licensing:

USE OF THE SOFTWARE IS SUBJECT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREIN. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND.
SENTECH SOFTWARE LICENSE TERMS:
The following License Terms govern your use of the accompanying Software unless you have a separate written agreement with SENTECH.
License Grant
SENTECH grants you a license to Use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License.
Ownership
The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination
SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
US Government Restricted Rights