GigE Cameras

 
GigE Series  ...  Resolutions  (VGA • XGA • SXGA • SXGA • UXGA • QSXGA)    
 
 

 

STC-GEC152A

SXGA, Color Camera

The STC-GEC152A is part of Sentech's Standard GigE camera line. It features a 1/2" color SXGA sensor, 19fps and communication over a 6 pin Hirose or Ethernet connector. The STC-GEC152A boasts precision housing with accurate CCD alignment, a DC Auto Iris Lens Driver, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam™.
1/2" CCD Image Sensor
SXGA (1.3 Megapixel), 19fps
User-Programmable Area of Interest (AOI)

 

Back    Front    Right    Left   

Select Options  
 

Name

Specifications
Model No
STC-GEC152A
Imager
½” Interline SXGA color progressive CCD: ICX205AK
Total Picture Element
1434 (H) x 1050 (V)
Active Picture Element
SXGA: 1360 (H) x 1040 (V)
Chip Size
7.6 (H) x 6.2 (V) mm
Cell Size
4.65 (H) x 4.65 (V) µm
Scanning System
Progressive
Vertical Frequency (Frame Rate)
19.25954 Hz at full resolution 0.31387 to 77.03817 Hz adjustable via the communication Max. frame rate depends on the AOI setting Max. frame rate of the camera(77.03817) is 200 vertical resolution AOI setting
Horizontal Frequency
20.5688 kHz
Pixel Frequency
36.818175 MHz
Noise Level
- @ 8bit output
≤ 3 Digit (Gain 0 dB)
- @ 10bit output
≤ 12 Digit (Gain 0 dB)
- @ 12bit output
≤ 48 Digit (Gain 0 dB)
Minimum Scene Illumination
15.49 Lux at F1.2, 19.25954 Hz
Sync System
Internal
Video Output
Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
Interface
IEEE802.3 (1000BASE-T)
Protocol
GigE Vision® 1.2 and GenICam™ 2.0 compliant
Shutter Speed
Preset continuous mode: 10 useconds to 16,777,216 useconds Preset trigger mode: 10 useconds to 16,777,216 useconds Pulse width mode: 10 useconds to Unlimited
ALC
Auto iris lens, electronic iris and AGC (ON/OFF)
Gain
0 to 20.4 dB
Gamma
Gamma 1.0 (Factory default) or uploadable gamma table
AOI Function
Programmable AOI setting via the communication
Smear Reduction
Selectable ON/OFF via the communication
Color Interpolation
Available on RGB output
White Balance Function
Auto, manual and push-to-set white balance is available on both Raw data output and RGB output
Trigger Mode
Edge preset trigger, Pulse width trigger (unlimited long exposure)
Communication
UART communication through Ethernet port
I/Os
One opto-isolated input and two open-collector outputs
Auto IRIS lens control
DC IRIS control input with video level target, peak/average and zone weight settings via the communication
Power
- Input Voltage
+10.8 to +26.4 Vdc
- Consumption
< 5.0 W
Dimensions
35 (W) x 35 (H) x 50.6 (D) mm excluding connectors
Optical Filter
IR cut filter on
Optical Center Accuracy
Positional accuracy in H and V directions: +/- 0.3 mm Rotational accuracy of H and V: +/- 1.5 deg.
Material
Aluminum (AC)
Lens Mount
C mount
Connectors
RJ45 connector Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent DC IRIS lens connector: M1951 (EMUDEN) or equivalent
Camera Mount Screws
Two 1/4” Tripod screw holes: (One on each top and bottom plate), Twelve M4 screws holes: (Four on each top and bottom plate, two on each side plate)
Weight
Approximately 120 g
Operating Temperature
- Minimum
Environmental Temperature -5⁰C
- Maximum
Camera housing temperature (top plate) shall not exceed 65 deg C (This corresponds to an environmental temperature of approximately 35 deg C)
Storage Temperature
-30 ~ 65 deg C
Vibration
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 38G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy
EMS: EN61000-6-2, EMI: EN55011
RoHS
RoHS Compliant
 
 
 

GigE (Standard) Models
ColorMonoSensorFormatResolutionFPSSize
STC-GEC33ASTC-GE33A1/3"VGA648 x 4949035 x 35 x 50.6 mm
STC-GEC83ASTC-GE83A1/3"XGA1024 x 7683635 x 35 x 50.6 mm
STC-GEC133ASTC-GE133A1/3"SXVGA1280 x 9663935 x 35 x 50.6 mm
STC-GEC152ASTC-GE152A1/2"SXGA1360 x 10401935 x 35 x 50.6 mm
STC-GEC202ASTC-GE202A1/1.8"UXGA1624 x 12361535 x 35 x 50.6 mm
STC-GEC500ASTC-GE500A2/3"QSXGA2448 x 20581535 x 35 x 50.6 mm

GigE (Standard) Power Over Ethernet Models
ColorMonoSensorFormatResolutionFPSSize
STC-POGEC33ASTC-POGE33A1/3"VGA648 x 4949050 x 50 x 53.5 mm
STC-POGEC83ASTC-POGE83A1/3"XGA1024 x 7683650 x 50 x 53.5 mm
STC-POGEC152ASTC-POGE152A1/2"SXGA1360 x 10401950 x 50 x 53.5 mm
STC-POGEC202ASTC-POGE202A1/1.8"UXGA1624 x 12361550 x 50 x 53.5 mm
 
 
Comparison Chart
Models GEC33A GEC83A GEC133A GEC152A GEC202A GEC500A
Resolution VGA (0.3MP) XGA (0.8MP) SXGA (0.8MP) SXGA (1.3MP) UXGA (2MP) QSXGA (5MP)
Image Sensor 1/3" 1/3" 1/3" 1/2" 1/1.8" 2/3"
Frame Rate 30, 60, 90 36 39 19 15 15
Picture Element 648 x 494 1024 x 768 1280 x 966 1360 x 1024 1624 x 1236 2448 x 2058
Dimension 35 x 35 x 50.6
 
 
Mechanical
 
STC-GEC152A
SXGA, Color Camera
 
DownloadTypeSoftwareNotes
SoftwareStGigE_Package_v1.04.0002 *Please contact sales representative for latest copy of the GigE software.
* Please contact your sales representative for this download.
 
 
DownloadTypeDocumentsNotes
1Protocolprot_Standard_en_v1.6.pdfProtocol Manual for the Standard GigE camera series
1CertificationRoHS_STC-GEC152A.pdfRoHS certificate for the STC-GEC152A
1Specificationsspec_STC-GE_Standard_en_v3.01.pdfSpecification sheet for the Standard GigE camera series
1User Guidesusers_STC-GE_GEC152A_en_v1.01.pdfUser guide for the SXGA GigE camera
* Please contact your sales representative for this download.
 
 

Terms and Licensing:

USE OF THE SOFTWARE IS SUBJECT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREIN. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND.
SENTECH SOFTWARE LICENSE TERMS:
The following License Terms govern your use of the accompanying Software unless you have a separate written agreement with SENTECH.
License Grant
SENTECH grants you a license to Use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License.
Ownership
The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination
SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
US Government Restricted Rights