Remote Head CameraLink Cameras

 
CameraLink  ...  Model Type  Cubed Head or Rectangular Head    
 
 

 

STC-RCL33A-R3

VGA, Monochrome Rectangle Remote Head Camera

The STC-RCLC33A-R3 is a full featured, rectangle remote head, cost effective, VGA, progressive scan, digital CameraLink® cube camera with a 1/3" monochrome CCD. It features a full frame, 90fps, VGA output, partial scanning, triggering, and reset capabilities.
1/3" CCD Image Sensor
VGA, Progressive Scan, 90fps
Rectangle Remote Head Type

 

Back    Right    Left   

Select Options  
 

Name

Specifications
Model No
STC-RCL33A-R3
Imager
⅓” Interline VGA Monochrome Progressive CCD: ICX424ALB
Total Picture Element
692 (H) x 504 (V)
Active Picture Element
VGA: 648 (H) x 494 (V)
Chip Size
5.79 (H) x 4.89 (V) mm
Cell Size
7.4 (H) x 7.4 (V) µm
Scanning System
Progressive
Scanning Method
Full, Partial full, ½ partial, ¼ partial, Variable partial, Binning (Partial, ½ partial, ¼ partial, Variable partial)
Horizontal Frequency
47.2028 kHz
Pixel Frequency
36.8181 MHz
S/N Ratio (Standard Deviation)
- @ 8Bit Output
≤ 3 Digit (Gain 0 dB)
- @ 10Bit Output
≤ 10 Digit (Gain 0 dB)
Minimum Scene Illumination
0.11 Lux at F1.2
Sync System
Internal / External
Video Output
Digital 8 or 10 bit Camera Link (Base Configuration)
Tap
1 Tap
Shutter Speed
OFF, ½ to 1/100,000 sec. (Variable at every H and clock)
Gain
0 to 27 dB
Gamma
1.0
Power Supply
- Input Voltage
12Vdc ± 10%
- Consumption
< 3.5W
Trigger Mode
Edge Preset Trigger (V-reset, Non-reset); Pulse Width Trigger (V-reset, Non-reset)
Communication
RS232 via Camera Link connector
Dimensions
- CCU
28 (W) x 28 (H) x 36.5 (D) mm Not including the connector
- Head
12 (W) x 12 (H) x 44 (D) mm
Optical Filter
No IR cut filter
Optical Center Accuracy
Positional accuracy in H and V directions: +/- 0.31 mm Rotational accuracy of H and V: +/- 2.1 deg.
Material
- Case
Front, base, and rear: Aluminum die cast (ADC 12) Cover: Steel sheet covered with zinc
- Tripod
Polycarbonate ABS
Lens Mount
M10.5 (P=0.5) (Male screw)
Interface Connector
HR 10A-7R-6PB (Hirose) or equivalent
Weight
Approximately 150g
Temperature and Humidity
- Operational
Temperature: -5 to 50 deg C; Relative Humidity: 0 to 85% (No condensation)
- Storage
Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No condensation)
Vibration
10Hz to 150Hz, 0.35 half amplitude (Maximum acceleration 50m/s2); 3 directions 8 times each
Shock
Acceleration 150m/s2, 6 directions 10 times each
Standard Compliancy
EN61326; 1997/AnnexA+A1, 1998 (EMI: Class B) +A2: 2001
RoHS
RoHS Compliant
 
 
 

Cube CameraLink Models
ColorMonoSensorFormatResolutionFPSSize
STC-CLC33ASTC-CL33A1/3"VGA648 x 49430, 60, 9028 X 28 X 40 mm
STC-CLC83ASTC-CL83A1/3"XGA1024 x 7683028 X 28 X 40 mm
STC-CLC83A-44STC-CL83A-441/3"XGA1024 x 7684428 X 28 X 40 mm
STC-CLC152ASTC-CL152A1/2"SXGA1360 x 102415, 1928 X 28 X 40 mm
STC-CLC202ASTC-CL202A1/1.8"UXGA1620 x 12201628 X 28 X 40 mm
STC-CLC232ASTC-CL232A1/1.8"UXGA1620 x 12363028 X 28 X 47 mm
STC-CLC500ASTC-CL500A2/3"QSXGA2448 x 20581635 x 35 x 40.7 mm

Cube CameraLink (Kodak Sensor) Models
ColorMonoSensorFormatResolutionFPSSize
STC-CLC338ASTC-CL338A1/3" (Kodak)VGA644 x 48424035 X 35 X 48.2 mm

Power Over CameraLink Models
ColorMonoSensorFormatResolutionFPSSize
STC-POCLC33ASTC-POCL33A1/3"VGA648 x 49430, 60, 9028 X 28 X 40 mm
STC-POCLC83ASTC-POCL83A1/3"XGA1024 x 7683028 X 28 X 40 mm
STC-POCLC83A-44STC-POCL83A-441/3"XGA1024 x 7683028 X 28 X 40 mm
STC-POCLC152ASTC-POCL152A1/2"SXGA1360 x 102415, 1928 X 28 X 40 mm
STC-POCLC202ASTC-POCL202A1/1.8"UXGA1620 x 12201628 X 28 X 40 mm
STC-POCLC232ASTC-POCL232A1/1.8"UXGA1620 x 12363028 X 28 X 47 mm
STC-POCLC500ASTC-POCL500A2/3"QSXGA2448 x 20581635 x 35 x 40.7 mm

Cube Remote Head CameraLink Models
ColorMonoSensorFormatResolutionFPSSize
STC-RCLC33A-C3STC-RCL33A-C31/3"VGA648 x 49430, 60, 9028 X 28 X 40 mm

Rectangular Remote Head CameraLink Models
ColorMonoSensorFormatResolutionFPSSize
STC-RCLC33A-R3STC-RCL33A-R31/3"VGA648 x 49430, 60, 9028 X 28 X 40 mm
 
 
Mechanical
Mechanical
 
STC-RCL33A-R3
VGA, Monochrome Rectangle Remote Head Camera
 
DownloadTypeSoftwareNotes
1SoftwareCLCtrl2 ver1.0.0.0.zipControl Software for the CameraLink series
* Please contact your sales representative for this download.
 
 
DownloadTypeDocumentsNotes
1Specificationsspec_STC-RCL_RCLC33A_en_v1.3.pdfSpecification sheet for the 0.3MP (VGA) Remote Head CameraLink camera
1User Guidesusers_STC-RCL_RCLC33A_en_v1.6.pdfUser Guide for the 0.3MP (VGA) Remote Head CameraLink camera
* Please contact your sales representative for this download.
 
 

Terms and Licensing:

USE OF THE SOFTWARE IS SUBJECT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREIN. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND.
SENTECH SOFTWARE LICENSE TERMS:
The following License Terms govern your use of the accompanying Software unless you have a separate written agreement with SENTECH.
License Grant
SENTECH grants you a license to Use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License.
Ownership
The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination
SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
US Government Restricted Rights