Camera Link (CMOS Sensor) Cameras

 
CameraLink  ...  Sensor  1" (Color • Monochrome)  -   2/3" (Color • Monochrome)    
 
 

 

STC-CMC4MCL

4 MP, Color Camera

The STC-CMC4MCL is part of the high-speed, CMOS Camera Link Camera series. This color camera uses the C-MOSIS 4 Megapixel sensor which outputs full resolution at 380 fps. The STC-CMC4MCL also provides full triggering capabilities, a configurable AOI (Area of Interest) and comes in a small package of 50 (W) x 50 (H) x 42 (D) mm.
High Performance Machine Vision Camera w/ Full Triggering
1" CMOS Sensor, High Speed Data Rate
Fully Configurable AOI (Area of Interest)

 

Back    Front    Right    Left   

Select Options  
 

Name

Specifications
Model No
STC-CMC4MCL
Imager
1" 4 Megapixel Color Progressive CMOS (CMOSIS: CMV4000)
Active Picture Element
2048 (H) x 2048 (V)
Chip Size
11.264 (H) x 5.984 (V) mm
Cell Size
5.5 (H) x 5.5 (V) μm
Scanning System
Progressive
Scanning Method
Full scanning, Variable partial scanning
Vertical Frequency (Frame Rate)
8-bit 10TAP: 180Hz / 10-bit MEDIUM: 80Hz (8-bit FULL / 8-bit MEDIUM / 8-bit BASE / 10-bit BASE is selectable via communication)
Horizontal Frequency
8-bit 10TAP: 372 kHz / 10-bit MEDIUM: 164 kHz
Pixel Frequency
8-bit 10TAP: 48 MHz / 10-bit MEDIUM: 21.25 MHz
Noise Level
≤ 3 Digit (Gain 0 dB)
Sync System
Internal
- @ 8Bit Output
10TAP / FULL / MEDIUM / BASE configuration
- @ 10Bit Output
MEDIUM / BASE configuration
Shutter Speed
OFF, 45 seconds to 1/372,093 seconds (Variable at line)
Digital Gain
1x to 4x
Gamma
1.0
- Input Voltage
12Vdc ± 10%
- Consumption
Less than 4.5 W
Trigger Mode
Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset)
Communication
RS232 via Camera Link connector
Dimensions
50 (W) x 50 (H) x 42 (D) mm (Excluding the connector)
Optical Filter
No IR cut filter
Material
Aluminum (AC)
Lens Mount
C mount
Interface Connector
Camera Link connector: SDR connector x 2; Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent
Weight
Approximately 140 g
Operating Temperature
-5 to 40 deg. C
Storage Temperature
-30 to 65 deg. C
Vibration
20Hz to 200Hz to 20Hz (5min.cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy
EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS
RoHS Compliant
 
 
 

Cube CameraLink (CMOS) Models
ColorMonoSensorFormatResolutionFPSSize
STC-CMC2MCLSTC-CMB2MCL2/3"2 MP2048 x 108834050 x 50 x 40.5 mm
STC-CMC4MCLSTC-CMB4MCL1"4 MP2048 x 204818050 x 50 x 42 mm
 
 
Comparison Chart
Models CMB4MCL CMC4MCL CMB2MCL CMC2MCL
Image Sensor 1/4" 2/3"
Color Monochrome Color Monochrome Color
Picture Element 2048 x 2048 2048 x 1088 2048 x 2048 2048 x 1088
Resolution UXGA (2MP)
Frame Rate 30, 60, 90 30 44 15, 19
Dimension 28 x 28 x 29.5
 
 
Mechanical
 
STC-CMC4MCL
4 MP, Color Camera
 
DownloadTypeSoftwareNotes
1SoftwareCLCtrl2 ver1.0.0.0.zipControl Software for teh Camera Link series
* Please contact your sales representative for this download.
 
 
DownloadTypeDocumentsNotes
1Specificationsspec_STC-CMC_CMB_en_v0.04.pdfSpecification sheet for the High-Speed CMOS Camera Link series
1User Guidesusers_STC-CMC_CMB_en_v1.0.pdfUser guide for the High-Speed CMOS Camera Link series
* Please contact your sales representative for this download.
 
 

Terms and Licensing:

USE OF THE SOFTWARE IS SUBJECT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREIN. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND.
SENTECH SOFTWARE LICENSE TERMS:
The following License Terms govern your use of the accompanying Software unless you have a separate written agreement with SENTECH.
License Grant
SENTECH grants you a license to Use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License.
Ownership
The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer.
Termination
SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
US Government Restricted Rights