Name |
Specifications |
Model No |
STC-CLC83A-44 |
Imager |
⅓” interline XGA color progressive CCD: ICX204AK |
Total Picture Element |
1077 (H) x 788 (V) |
Active Picture Element |
1024 (H) x 768 (V) |
Chip Size |
5.8 (H) x 4.92 (V) mm |
Cell Size |
4.65 (H) x 4.65 (V) µm |
Scanning System |
Progressive |
Scanning Method |
Full, Partial full, ½ partial, ¼ partial, Variable partial
|
Vertical Frequency (Frame Rate) |
43.77 Hz |
Horizontal Frequency |
34.84 kHz |
Pixel Frequency |
44.25 MHz |
S/N Ratio |
|
- @ 8bit output |
≤ 3 Digit (Gain 0 dB) |
- @ 10bit output |
≤ 10 Digit (Gain 0 dB) |
Minimum Scene Illumination |
0.25 Lux at F1.2 |
Sync System |
Internal / External |
Video Output |
Digital 8 or 10 bit CameraLink® (Base Configuration) |
Tap |
1 Tap |
Shutter Speed |
OFF, 1/5 to 1/96,000 seconds (Variable at every H and clock) |
Gain |
0 ~ 27dB |
Gamma |
1.0 |
Power Supply |
|
- Input Voltage |
12 Vdc ± 10% |
- Consumption |
< 1.8 W |
Trigger Mode |
Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset) |
Communication |
RS232 via Camera Link connector |
Dimensions |
28 (W) x 28 (H) x 29.5 (D) mm (Not including lens mount and the connector) |
Optical Filter |
No IR cut filter |
Optical Center Accuracy |
Positional accuracy in H and V directions: +/- 0.31 mm;
Rotational accuracy of Hand V: +/- 2.1 deg.
|
Material |
|
- Case |
Front, base, and rear: Aluminum die cast (ADC12)
Cover: Steel sheet covered with zinc
|
- Tripod |
Polycarbonate ABS |
Lens Mount |
C mount |
Interface Connector |
HR10A-7R-6PB (Hirose) or equivalent |
Tripod |
Tripod can be attached to 4 plates
(4screws on the bottom plate, 3 screws on the other 3 plates)
|
Weight |
Approximately 52g (Camera: 43g, tripod: 9g) |
Temperature and Humidity |
|
- Operating |
Temperature: -5 to 50 deg C;
Relative Humidity: 0 to 85% (No condensation)
|
- Storage |
Temperature: -30 to 65 deg C;
Relative Humidity: 0 to 90% (No condensation)
|
Vibration |
20 Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each |
Shock |
Acceleration 70G, half amplitude 6ms, 3 directions 3 times each |
Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 (Class B) |
RoHS |
RoHS compliant |