• Auto Focus Block
• Analog
• CameraLink
• GigE
• High Definition
• Progressive Scan
• Specialty
• USB 2.0
•  
• Closeout Inventory
• Warranties

• Lens Calculator

• Catalog
• Documentation
• Software

• Directory
• Engineering
• Sales
• Support
•  
• Distributors
• Employment
• News
• Offices
• Terms and Conditions

• 972.481.9223
• Fax 972.481.9209
• US Toll Free 877.736.8324
•  
• Sales

• English  
• Deutsch  
• Español  

Select Options  

• Specifications

• CameraLink Series

• Comparison

• Mechanical Drawings

• Documents and Software

Name Specifications Model No STC-CLC500A Imager ⅔” interline 5.0 M Pixels color progressive CCD: ICX625AQ Total Picture Element 2456 (H) x 2058 (V) Active Picture Element 2448 (H) x 2058 (V) Chip Size 9.93 (H) x 8.70 (V) mm Cell Size 3.45 (H) x 3.45 (V) µm Scanning System Progressive Scanning Method Full, Partial full, ½ partial, ¼ partial, Variable partial Vertical Frequency (Frame Rate) 16 Hz Horizontal Frequency 33.264 kHz Pixel Frequency 64 MHz S/N Ratio - @ 8bit output ≤ 4 Digit (Gain 0 dB) - @ 10bit output ≤ 15 Digit (Gain 0 dB) - @ 12bit output ≤ 60 Digit (Gain 0 dB) Minimum Scene Illumination 0.32 Lux @ F1.2 Sync System Internal Video Output Digital 8, 10 or 12 bit Camera Link (Base Configuration) Tap 2 Taps Shutter Speed OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock) Gain 0 to 18.309 dB Gamma 1.0 Power - Input Voltage 12 Vdc ± 10% - Consumption < 4.0 W Trigger Mode Edge Preset Trigger (V-reset, Non-reset) Pulse Width Trigger (V-reset, Non-reset) Communication RS232 via Camera Link connector Dimensions 35 (W) x 35 (H) x 30.2 (D) mm (not including lens mount or the connector) Optical Filter No IR cut filter Material Aluminum (AC) Lens Mount C Mount Power I/O Connector HR10A-7R-6PB (Hirose) or equivalent Weight Approximately 80g Temperature and Humidity - Operational Temperature: -5 to 40 deg C; Relative Humidity: 0 to 85% (No condensation) - Storage Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No condensation) Vibration 20Hz to 200Hz to 20Hz (5min./cycle), Acceleration 10G, 3 directions 30 min. each (6 cycle) Shock Acceleration 38G, half amplitude 6ms, 3 directions 3 times each Standard Compliancy EMS: EN61000-6-2, EMI: EN55022 (Class B) RoHS RoHS Compliant

 

 

 

Cube CameraLink Models
Color Mono Sensor Format Resolution FPS Size STC-CLC33A STC-CL33A 1/3" VGA 648 x 494 30, 60, 90 28 X 28 X 40 mm STC-CLC83A STC-CL83A 1/3" XGA 1024 x 768 30 28 X 28 X 40 mm STC-CLC83A-44 STC-CL83A-44 1/3" XGA 1024 x 768 44 28 X 28 X 40 mm STC-CLC152A STC-CL152A 1/2" SXGA 1360 x 1024 15, 19 28 X 28 X 40 mm STC-CLC202A STC-CL202A 1/1.8" UXGA 1620 x 1220 16 28 X 28 X 40 mm STC-CLC232A STC-CL232A 1/1.8" UXGA 1620 x 1236 30 28 X 28 X 47 mm STC-CLC500A STC-CL500A 2/3" QSXGA 2448 x 2058 16 35 x 35 x 40.7 mm
Cube CameraLink (Kodak Sensor) Models
Color Mono Sensor Format Resolution FPS Size STC-CLC338A STC-CL338A 1/3" (Kodak) VGA 644 x 484 240 35 X 35 X 48.2 mm

Power Over CameraLink Models

Color Mono Sensor Format Resolution FPS Size STC-POCLC33A STC-POCL33A 1/3" VGA 648 x 494 30, 60, 90 28 X 28 X 40 mm STC-POCLC83A STC-POCL83A 1/3" XGA 1024 x 768 30 28 X 28 X 40 mm STC-POCLC83A-44 STC-POCL83A-44 1/3" XGA 1024 x 768 30 28 X 28 X 40 mm STC-POCLC152A STC-POCL152A 1/2" SXGA 1360 x 1024 15, 19 28 X 28 X 40 mm STC-POCLC202A STC-POCL202A 1/1.8" UXGA 1620 x 1220 16 28 X 28 X 40 mm STC-POCLC232A STC-POCL232A 1/1.8" UXGA 1620 x 1236 30 28 X 28 X 47 mm STC-POCLC500A STC-POCL500A 2/3" QSXGA 2448 x 2058 16 35 x 35 x 40.7 mm

Cube Remote Head CameraLink Models
Color Mono Sensor Format Resolution FPS Size STC-RCLC33A-C3 STC-RCL33A-C3 1/3" VGA 648 x 494 30, 60, 90 28 X 28 X 40 mm

Rectangular Remote Head CameraLink Models
Color Mono Sensor Format Resolution FPS Size STC-RCLC33A-R3 STC-RCL33A-R3 1/3" VGA 648 x 494 30, 60, 90 28 X 28 X 40 mm

 

 

Comparison Chart
Models	CLC33A	CLC83A	CLC83A-44	CLC152A	CLC202A	CLC232A	CLC500A	CLC338A
Resolution	VGA (0.3MP)	XGA (0.8MP)	XGA (0.8MP)	SXGA (1.3MP)	UXGA (2MP)	UXGA (2MP)	QSXGA (5MP)	VGA (0.3MP)
Sensor	1/3"	1/3"	1/3"	1/2"	1/1.8"	1/1,8"	2/3"	1/3" (Kodak)
Frame Rate	30, 60, 90	30	44	15, 19	16	30	16	240
Picture	648 x 494	1024 x 768	1024 x 768	1360 x 1024	1620 x 1220	1620 x 1236	2448 x 2058	644 x 484
Dimension	28 x 28 x 29.5					28 x 28 x 36.5	35 x 35 x 30.2	35 x 35 x 48.2

 

 

 

STC-CLC500A

QSXGA, Color Camera

 

Download	Type	Software	Notes
	Software	CLCtrl2 ver1.0.0.0.zip	Control Software for the CameraLink series

* Please contact your sales representative for this download.

 

 

Download	Type	Documents	Notes
	Specifications	spec_STC-CL_CLC500A_en_v1.6.pdf	Specification sheet for the 5MP (QSXGA) CameraLink camera
	User Guides	users_STC-CL_CLC500A_en_v2.0.pdf	User Guide for the 5MP (QSXGA) CameraLink camera

* Please contact your sales representative for this download.

 

 

Terms and Licensing: USE OF THE SOFTWARE IS SUBJECT TO THE SENSOR TECHNOLOGIES CO., LTD. (SENTECH) SOFTWARE LICENSE TERMS SET FORTH HEREIN. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND (IF APPLICABLE). IF THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR FULL REFUND. SENTECH SOFTWARE LICENSE TERMS: The following License Terms govern your use of the accompanying Software unless you have a separate written agreement with SENTECH. License Grant SENTECH grants you a license to Use one copy of the Software. Use means storing, loading, installing, executing or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. The SDK and included drivers may be used to interface to third party software or to generate original code, but the use of the SDK or included drivers in no way negates or modifies the terms and conditions of this Software License. Ownership The software is owned and copyright by SENTECH. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software. Copies and Adaptations You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any bulletin board or similar system. No Disassembly or Decryption You may not disassemble or decompile the Software unless Sentech's prior written consent is obtained. Upon request, you will provide SENTECH with reasonably detailed information regarding any disassembly or decompilation. You may not decrypt the Software unless decryption is necessary part of the operation of the Software. Transfer Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must deliver the Software including any copies and related documentation, to the transferee. The transferee must accept these License Terms as a condition to the transfer. Termination SENTECH may terminate your license upon notice for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form. US Government Restricted Rights