STC-MB42E

Analog, 2:1 Interlace CCD, EIA, Mono, Cased

The STC-MB42E is an industrial grade, EIA, 2:1 interlace camera, with a 1/2", monochrome CCD. These cameras are designed and machined with very tight tolerances to have optimal CCD centering quality. This series of camera is extremely reliable, provides a high quality image and is very cost effective. The ultra-compact housing has manual dip switches for on-the-fly adjustments and the camera can be controlled via RS232 software.  

  Documents

  Software and Drivers

Responsive image

  1/2'' CCD Image Sensor, EIA

  570 TV Lines

  Up to 64 pixels ( Default: ON)


Specifications

  Imaging

Model No

STC-MB42E

Image Sensor

1/2” Interline Monochrome EIA CCD: ICX418AL

Active Picture Element

756 (H) x 485 (V)

Chip Size

5.59 (H) x 4.68 (V) mm

Cell Size

6.35 (H) x 7.40 (V)

  Function

Scanning System

2:1 Interlace

Vertical Frequency

59.94 Hz (Normal Speed) / 119.88 Hz (Double Speed) (Default: 59.94 Hz)

Horizontal Frequency

15.734 kHz (Normal Speed) / 31.468 kHz (Double Speed) (Default: 15.734 kHz)

Pixel Frequency

14.318 MHz (Normal Speed) / 28.636 MHz (Double Speed) (Default: 14.318 MHz)

Resolution

570 TV Lines

S/N Ratio

56 dB (GAIN 0dB)

Minimum Scene Illumination

Less than 1 Lux at F1.2

Sync System

Internal / External (Auto Select)

Video Output

1.0 Vp-p / 75 Ω, DC coupling

Shutter Speed

-

- Dip Switch

Normal Speed: OFF, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/5000, 1/8000, 1/10000, 1/20000, 1/100000 seconds (Default: OFF) Double Speed: OFF, 1/120、1/200、1/240、1/500、1/1000、1/2000、1/4000、1/8000、1/10000、1/16000, 1/20000、1/40000、1/200000 seconds

- Communication

Normal Speed: OFF, 1/60 to 1/100000 seconds (Variable at every horizontal and clock) Double Speed: OFF, 1/120 to 1/200000 seconds (Variable at every horizontal and clock)

Integration Mode

Field / Frame (Default: Frame)

Gain

0 to 24 dB (Default: 0dB)

Gamma

1 / 0.45 (Default: 1)

Operational Mode

Free-run / Edge preset trigger (V reset / Non-reset) / Pulse width trigger (V reset / Non-reset) / Re-start & Reset trigger (long exposure) / Start & stop trigger (Default: Pulse width trigger)

Pixel Defect Correction

Up to 64 pixels (Default: ON)

Field update Function

Supported

Communication

RS232 via 12 Pin Connector

Power

-

- Input Voltage

DC12V +/- 10%

- Consumption

Less than 1.8 W

  Mechanical

Dimensions

28 (W) x 28 (H) x 40 (D) mm (excluding the connector)

Lens Mount

C Mount

Optical Filter

No IR cut filter

Optical Center Accuracy

Positional Accuracy in H and V Directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 2.1 deg.

Material

-

- Case

Aluminum alloy

- Tripod

Polycarbonate ABS

Interface Connector

HR10A-10R-12PB (Hirose) or equivalent

Tripod

Tripod can be attached to 4 plates (4 screws on the bottom plate, 3 screws on the top plate)

Weight

Approx. 46g

  Environmental

Operating Temperature

Environmental Temperature: -5 to +55 deg. C, Environmental Humidity: 0 to 85%

Storage Temperature

Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%

Vibration

20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each

Shock

Acceleration 70G, half amplitude 6 ms, XYZ 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011 (Class B)

RoHS

RoHS Compliant

 



   Series

EIA CCIR Sensor Resolution FPS Size
STC-MB43E STC-MB43C 1/3" CCD EIA / CCIR 60 28 x 28 x 40 mm
STC-MB42E STC-MB42C 1/2" CCD EIA / CCIR 60 28 x 28 x 40 mm



  Mechanical Drawings

Responsive image



 
 

   Tele: 972-481-9223

|

   US Toll Free: 1 (877)-736-8324

|

   Fax: 972-481-9209