|
Home | Site Map | Contact Copyright® Sensor Technologies America, Inc. 2004 |
| .: Specifications :. | |
| Image Sensor: | EGE-F-H22N: Color 1/2" NTSC 768 (H) x 494 (V) IT CCD EGE-F-H22P: Color 1/2" PAL 752 (H) x 582 (V) IT CCD EGE-F-H32N: Color 1/3" NTSC 768 (H) x 494 (V) IT CCD EGE-F-H32P: Color 1/3" PAL 752 (H) x 582 (V) IT CCD EGE-F-H42N: Color 1/4" NTSC 768 (H) x 494 (V) IT CCD EGE-F-H42P: Color 1/4" PAL 752 (H) x 582 (V) IT CCD |
| Connection to CCU : | Flexible Printed Circuit Cable (Length can vary up to 8") |
| Signal Formats: | NTSC and PAL |
| Special Configuration : | Available in a two-headed ccd configuration |
| Horizontal Sync Frequency: | 15.734 kHz |
| Vertical Sync Frequency: | 59.94 Hz |
| Horizontal Resolution: | 480 TV Lines |
| Gamma: | 0.45 (DSP Adjustable) |
| AGC: | On/Off (0 ~ 18dB) |
| Minimum Illumination: | EGE-F-H22N/P - 0.25 Lux @ F1.2, 50 IRE EGE-F-H32N/P - 0.25 Lux @ F1.2, 50 IRE EGE-F-H42N/P - 0.5 Lux @ F1.2, 50 IRE |
| Y/C Out: | 1.0 Vp-p, 75W |
| Video Out: | 1.0 Vp-p, 75W |
| Sync System: | Internal |
| White Balance: | Auto/Manual/Push-toSet |
| Aperture Gain: | Off/On (On has two levels- user definable) 2-bit - status output |
| Electronic Iris: | 1/60 ~ 1/10,000 Second |
| Electronic Shutter: | Extended Integration: 2FLD to 16FLD (8 Steps) High Speed: 1/60 (1/50) to 1/10,000 Second (8 Steps) |
| S/N Ratio: | >48 dB (AGC Off) |
| Negative Positive: | DSP Selectable |
| Back Light: | Back light compensation at electronic shutter |
| Operating Voltage: | 6-8V DC |
| Operating Temperature: | -10°C ~ 45°C (14°F ~ 113°F) |
| Storage Temperature: | -30°C ~ 60°C (-22°F ~ 140°F) |
| Power Consumption: | Approximately 240mA, Variation is CCD Dependant |
| CCU Dimensions: | 26 (W) x 20 (H) x 60 (L) mm (1.04" x .8" x 2.4") |
| CCU Head Dimensions: | 12 (W) x 12 (H) x mm (.48" x .48") |
| Weight: | 26g (.91 oz.) |
 |
|
EGE-F-2H4N (Two-Headed Version) |
|
| Sentech High Sensitivity OEM Cameras: EGE-F |
 |
The EGE-F series is based on high-resolution 1/4", 1/3", and 1/2" CCD's with a flexible printed circuit cable (FPC) connecting the main camera boards and the CCD board. The EGE-F offers a very flexible integration to almost any application. Sentech also offers a two-headed version of this camera for very special applications. |
EGE-F-H42N |
|
